Up to your Taste
Create your very own profiling machine for bassoon.
By choosing the barrel that best suits your needs, you can define the profile of your profiled cane.
You can choose between an eccentric or concentric profile.
The eccentric barrel will give you thinner sides of the cane than the concentric barrel.
In addition to our standard eccentric barrel there are three other eccentric variants, each with a more defined spine in the middle of the blade.
Spine + is 0.26mm thicker at the spine
Spine ++ is 0.48mm thicker at the spine
Spine +++ is 0.55mm thicker at the spine
-
-
The length stop integrated into the barrel makes it even easier to position the cane.
The position of the length stop is variable so that you can adjust it to different cane lengths.
-
-
For profiles with a more pronounced spine, there are special barrels with beveled pins.
You can choose between three variants in addition to our standard one to get your favorite result.
-
-
You can create a complete exchange set for your barrel. The clamp rings and the rotating handle are not included in the scope of delivery of the single barrel.
You can get the clamp rings as well as the rotating handle separately as accessories.
Please note that the clamp rings for bassoon and contrabassoon have different sizes.
- What’s in the Box
- Clamp rings and rotating handle are NOT included, but can be purchased separately.
- Manufacturer
- Reeds 'n Stuff
Matching Products
Personally tailored
This newly revised machine is equipped with all the features
to enable a setup tailored to your personal desires.
The many individually modifiable variables allow you to pre-shape
the tip of your reeds with the profiling machine.
The two-part ramp plays an important role in this, allowing an individual incline and an adjustable starting point for the tip, if desired.
Additionally, you can choose between different barrels,
customizing the profile even further.
These and many more smart details turn working with this profiling machine
into a whole new experience.
The profiling machine is suitable for gouged & shaped cane as well only gouged cane,
and can be converted for contra bassoon cane.
-
-
The two-part ramp not only allows for continuous adjustment of the incline of the profile,
but also enables the profiling of a tip.The length of the tip as well as its profile angle
are also variable.This way you get your very own
personal profiling machine.
-
-
The length stop integrated into the barrel makes it even easier to position the cane.
The position of the length stop is variable, accommodating for different cane lengths.
-
-
For profiles with a more pronounced spine, there are special barrels with beveled pins.
You can choose between three variants in addition to our standard barrel to achieve your desired result.
Here you can find the profiles in comparison.
-
-
The position of the scoring blades is continuously adjustable, so that you can choose
the length of your blade.
-
-
The scoring blades automatically disappear behind this blade protection when folded, contributing to injury-free working.
-
-
The newly designed base plate allows for an easy transformation of the profiling machine from bassoon
to contrabassoon.This enables you to easily use one machine
for all your reeds.
-
-
Thanks to the new transport lock, the machine is now ready to accompany you on your travels
without the risk of damage.Please make sure to take the barrel out of the machine
for transport.
-
-
The included cane clip helps ensure a clean and consistant profile without tears.