完璧なカット
mm単位の目盛りでカットの長さを10ー80mmに設定できます。
リードをお好みの長さにカットしてください。
ストッパーで長さを固定できます。
刃研ぎも可能です。
-

-
隙間から鮮明にリードの先端が見えるので、微分量のカットが可能です。
-

-
リードホルダー オーボエ用はイングリッシュホルンのリードにも使えますが、使用頻度が高い場合はマンドレル式リードホルダーを推奨いたします。.
-

-
リードホルダーは簡単に交換できます。ギロチンが全てのオーボエ族のリードに使えるようになります。
マンドレル式リードホルダー 古楽器にも使用可能です。
-

-
マンドレルの長さは調節可能です、それぞれのチューブに合わせてください。
チュートリアル:
-

-
ストッパーを固定することにより、常にお好みの長さにカットできます。
You can remove the tarnish with metal polish.
Why is there some tarnish on my blades?The reason why we use a steel that creates a patina over use is a technical one. The cutting abilities of such a steel are better than those of stainless steels.
What can I do to check the quality of the cut?You can check the cut by trying to cut a piece of paper. If the blade does the job then there is no need to exchange them. If they do not, it can be for two reasons: 1. The blade is really blunt. Then an exchange of blades would be good. 2. The 4 screws that hold the front blade are too loose. Tighten them just enough the cutting blade can be moved tight up and down but the blade cannot wobble. Start with the upper two screws. Then, if needed, tighten the lower two as well.
- メーカー
- Reeds 'n Stuff
- 生産国
- ドイツ
- 型番
- F10-15000-01F10-15000-01
- 法的保証
- ドイツの消費者保護法に基づき、欠陥がある商品または売買契約に適合しない商品について、消費者は販売者に対して無償で修理または交換を請求することができます。また、価格の減額や購入代金の返金を求める権利もあります。これらの権利は、商品が消費者に引き渡された日から2年間有効です。詳細については、
here.
お問い合わせ
Reeds 'n Stuff GmbH
Karlsbader Straße 88c
09465 Sehmatal-Cranzahl
Germany
[email protected]
誤った使い方をすると、怪我をする恐れがあります。
本製品は密室での使用を目的としています。