Your Reeds. Your Settings.
Let the machine do the rest.
Scraping by hand demands your full attention, every single time. One inconsistent pass, a moment of distraction, or a long session of repetitive scraping – and the reed you've been carefully building can fall apart at the final stage. There has to be a better way.
The Tip Profiler ARUNDOMAX takes the repetition out of reed-making and puts the precision in your hands. Place your reed on the machine, select one of your saved presets on the touchscreen, close the lid – and watch it work. When the green screen smiles back at you, the profiling is done.
Programmable presets
Dial in your perfect profile once, save it, and reproduce it exactly every time. No re-learning your settings from session to session.
Every Parameter, One Finger
Scrape width, length, and shape – everything that defines how your reed plays is adjustable directly on the touchscreen. Dial in your signature sound and save it as a preset. The next time you sit down to make reeds, it's already waiting for you.
Four speed settings
From quietly profiling reeds during an evening lesson to producing them as fast as possible before a rehearsal. You choose the pace.
Want to scrape just the tip, just the sides, or just the middle? Easy as pushing a button.
Your pace. Your call.
Fine-tune exactly how each program runs – how quickly the blade moves across the reed, how fast the reed rotates between passes, and how many times it goes over. Set it once, save it, and every reed that follows is made on your terms.
Scrape only what you need
Working on just the tip? Refining the sides? Focusing on the middle? Select the zone, adjust the settings, and let the machine do the rest. No guesswork, no over-scraping – just the result you were aiming for.
LED carriage light
See every detail of the scrape clearly, whatever the lighting in the room
No battery, no restrictions
Powered by the included cord, so there are no charging headaches and no airline luggage restrictions to worry about when you travel.
Note: the micro-USB port is for troubleshooting purposes only. Do not attempt to power the machine through this port.
A sharp blade, always.
Dull blades interrupt your flow – and resetting blade height every time you change one is exactly the kind of friction that breaks your concentration. The Blade 360° solves both problems. When the cutting edge dulls, simply rotate to the next sharp section and carry on – at least six times per blade. And because the blade height is set once from the underside and stays locked, changing edges never throws off your setup.
60日間テンプレートお試しできます
自分に合う型を見つけてください。
- 重量
- 1440 g
- メーカー
- Reeds 'n Stuff