One For All
This muti-faceted Bevel Tool can be used in many ways, helping you bevel and sand your cane in any way you need. Use it in conjunction with the sanding tool to also sand the gouge side of the cane nice and smooth.
V-Style
With the sandpaper clamped between the two halves, you can take your cane and bevel your cane with the beloved V-style bevel. Tip: Hold the cane at an angle to get a tapered bevel.
Herzberg
The center section is designed specifically for a Herzberg style bevel. Place the sandpaper between the two halves so that the edge is flush with the edge of the tool, then go ahead and bevel your cane. The depth of the cutout is the exact length of the Herzberg-style bevel, and the angle at the back allows you to make the taper without shortening the bevel or having to make pencil marks.
Freedom
With a surface length of 30 mm, this upper section allows you to clamp the longer piece of sandpaper in and freely bevel on a flat surface in any way and length you would like.
Inside
Many reed makers prefer to sand the inside of the cane one last time to even out any possible inconsistencies, as well as lend some brightness and brilliance back to the sound. The rounded support holds the cane while you use the sanding tool to sand the gouge side of the cane nice and smooth.
- 高さ
- 4 cm
- 幅
- 3 cm
- 長さ
- 12.5 cm
- 重量
- 71.5 g
- メーカー
- Reeds 'n Stuff
- 法的保証
- ドイツの消費者保護法に基づき、欠陥がある商品または売買契約に適合しない商品について、消費者は販売者に対して無償で修理または交換を請求することができます。また、価格の減額や購入代金の返金を求める権利もあります。これらの権利は、商品が消費者に引き渡された日から2年間有効です。詳細については、
here.