https://www.reedsnstuff.com/jp/Reedolino/Shaping-Tying-with-Cristina-G-mez/ products in category Shaping & Tying with Cristina Gómez jp Reeds 'n Stuff Mon, 12 Oct 2026 04:35:48 +0200 Reeds 'n Stuff info@reedsnstuff.com (Udo Heng) https://www.reedsnstuff.com/out/reedsnstuff2024/img/logo_pe.png https://www.reedsnstuff.com/jp/Reedolino/Shaping-Tying-with-Cristina-G-mez/ https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-2/oxid-oxid-5/Sharpening-Stone-MISSARKA-BLUE.html Fri, 09 Oct 2026 15:50:59 +0200 <img src='https://www.reedsnstuff.com/out/pictures/generated/product/1/390_255_100/1202-00008.jpg' border=0 align='left' hspace=5><hgroup> <h2>On Point</h2> <p>These MISSARKA sharpening stones are perfect for taking care of your reed making tools. Whether you are looking to keep your blade sharp, or need to bring an old blade back to life, the MISSARKA stones have you covered.</p> <p>The <a class="rns_textlink" href="https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-2/oxid-oxid-5/Sharpening-Stone-MISSARKA-ULTRA.html" title="購入">MISSARKA ULTRA</a> stone is a fine grit (F1000/JIS3000) stone that is perfect for keeping the edge of your knives and blades sharp. Run the blade over the stone a few times to keep the edge sharp.</p> <p>The <a class="rns_textlink" href="https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-2/oxid-oxid-5/Sharpening-Stone-MISSARKA-BLUE.html" title="購入">MISSARKA BLUE</a> is a duo-stone. The blue portion (F500/JIS1200) can be used to give the blade a new angle, or grind worn blades down to a straight edge again. The white portion (F1200/JIS4000) is an ultra-fine grit stone that can then be used to give the blade it's final polish, as well as maintain the edge.</p> </hgroup> <hgroup> <img src="https://www.reedsnstuff.com/out/pictures/wysiwigpro/details/1202-00007_02-grau.jpg" width="1500" height="1200" title="" alt="" /> <p>Both stones are shipped in a protective box and include a sharpening guide.</p> </hgroup> <hgroup> <img src="https://www.reedsnstuff.com/out/pictures/wysiwigpro/details/1202-00007-wasser.jpg" width="1500" height="1200" title="" alt="" /> <p>They can be used either with honing oil or soaked in water before use. Once the stones are used with oil it is recommended to continue using oil and not switch back to water in order to maintain the quality of the stone.</p> </hgroup> https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-2/oxid-oxid-5/Sharpening-Stone-MISSARKA-BLUE.html https://www.reedsnstuff.com/jp/oxid-oxid-23/R-S-PRINTS/Blade-Sharpening-Jig-PRINTS-oxid.html Fri, 09 Oct 2026 15:51:08 +0200 <img src='https://www.reedsnstuff.com/out/pictures/generated/product/1/390_255_100/1299-00105.jpg' border=0 align='left' hspace=5><hgroup> <h1>Never a Dull Blade</h1> <img data-youtube="K25TGiAWD5k" arrow="bright"> <p>The R'S Prints blade sharpening jig makes sharpening your profiling blades easy. Place the blade into the jig, run it over your sharpening stone, and voila - like new.</p> </hgroup> <hgroup> <img src="https://www.reedsnstuff.com/out/pictures/wysiwigpro/details/1299-00105-anwendung_01.jpg" width="1500" height="1200" title="" alt="" /> <p>Set up is simple:<br>place a piece of paper underneath the wheels, then place the blade so that it is touching the sharpening stone. Tighten the screw and the angle is all set.</p> </hgroup> <hgroup> <img src="https://www.reedsnstuff.com/out/pictures/wysiwigpro/details/1299-00105_anwendung_03.jpg" width="1500" height="1200" title="" alt="" /> <p>Remove the piece of paper then run the jig over the stone several times until you see an even reflective surface on the bottom of the blade. This indicates that the blade has been properly sharpened.</p> </hgroup> <hgroup> <img src="https://www.reedsnstuff.com/out/pictures/wysiwigpro/details/1299-00105-anwendung-2.jpg" width="1500" height="1200" title="" alt="" /> <p>Take the blade off the jig and place the flat side on the sharpening stone. After 3-5 to passes to remove the burr, and the blade is ready to go.</p> </hgroup> <section class="faq detailmenueon toggle"> <button href="#detail-faq" class="detail-toggle cross"> <h1 id="rns_faq">FAQ</h1></button> <div id="detail-faq" style="display: none"><span class="fag-frage">Can the carbon version of the blade be sharpened with the Blade Sharpening Jig?</span> <p class="fag-antwort">The carbon version of the blade can also be sharpened. For this you will need a diamond stone, as the carbon blades are much harder. A regular sharpening stone will usually not do the job well enough.</p> </div></section> https://www.reedsnstuff.com/jp/oxid-oxid-23/R-S-PRINTS/Blade-Sharpening-Jig-PRINTS-oxid.html https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-1/oxid-oxid-5/oxid.html Sat, 10 Oct 2026 15:07:18 +0200 <img src='https://www.reedsnstuff.com/out/pictures/generated/product/1/390_255_100/20190903_f10-16000.jpg' border=0 align='left' hspace=5><hgroup> <img data-youtube="9LxXmSS-s4Y" arrow="bright"> <h2>機能的で精密</h2> <p>私たちReeds 'n Stuffのシェーピングマシーンはリニューアル致しました。<br> 使いやすさ、刃物の耐久性、作業机に固定できるクランプ<br> そして画期的なボールベアリングによりこのマシーンは一段と進化しました。<br> このマシーンに使用しているロックシステムは特許を取得しています。<br> このシェーピングマシーンは流通している<br> ほとんどのブランドの型に対応しています。</p> </hgroup> <hgroup> <img src="https://www.reedsnstuff.com/out/pictures/wysiwigpro/details/FS_OX_shaperforms_group_20191207.jpg" width="1500" height="1200" title="" alt="" /> <h2>豊富な種類</h2> <p>シェーピングマシーン購入の際には、型１つがついてきます。</p> <p><a class="rns_productlink" href="https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-1/Accessories-and-Blades/Shaping-Machine/oxid/" title="さらに詳しく" style="display:block;">さらに詳しく</a></p> </hgroup> <section id="details" class="faq detailmenueon toggle" name="FAQ"> <button href="#detail-faq" class="detail-toggle cross"> <h1 id="rns_faq">FAQ</h1></button> <div id="detail-faq" style="display: none"> <span class="fag-frage">Are the Blade Pair for Oboe Shaping Machine also compatible with a Hörtnagl Shaping Machine?</span> <p class="fag-antwort">Our Blade Pair for the R'S Shaping Machine can also be used with the Hörtnagl Shaping Machine. </p> <span class="fag-frage">Are the Shaper Forms for Oboe Shaping Machine also compatible with a Hörtnagl Shaping Machine?</span> <p class="fag-antwort">Our Shaper Forms for the R'S Shaping Machine can also be used with the Hörtnagl Shaping Machine. We also recommend using the <a class="rns_textlink" href="https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-1/Accessories-and-Blades/Shaping-Machine/oxid-oxid.html" title="Screw set for shaper forms">screw set for shaper forms</a>. </p> </div></section> https://www.reedsnstuff.com/jp/oxid-oxid-1/oxid-oxid-1/oxid-oxid-5/oxid.html