Reeds 'n Stuff/Reedolino/Reedmaking with Albrecht Mayer 商品

メーキングマシーン 2,047.18 €

Fri, 09 Oct 2026 15:52:18 +0200

お好みの音色、響き…
私たちのマシーンは「型・スクレープ・プラーク」を自由に選択でき
その組み合わせにより理想のリードとなります。

A sharp blade, always.

Dull blades interrupt your flow – and resetting blade height every time you change one is exactly the kind of friction that breaks your concentration. The Blade 360° solves both problems. When the cutting edge dulls, simply rotate to the next sharp section and carry on – at least six times per blade. And because the blade height is set once from the underside and stays locked, changing edges never throws off your setup.

持続できる切れ味

硬い耐久性がある刃を使用と共に、替刃の販売や刃研ぎサービスも行なっております。
替刃設定用キャリパーを使用すれば約1分で刃の再調整が可能。
私たちのマシーンは荒削り用ではありません！
いつまでも手直しなしでリードが出来ます。購入

どこにでも

この持ち運び用バックに収納すれば
コンパクトに安全に
メーキングマシーンを持ち運ぶことができます。
サイドのチャックを開ければ
必要な道具も収納することができます。

60日間テンプレートお試しできます

自分に合う型を見つけてください。

お試しはどのように行う?

テンプレートのリスト

プラークは最適なものをご使用ください。購入

スクレープ金具でスクレープの形を選べます。購入

硬度計　デジタル 597.09 €

Fri, 09 Oct 2026 15:52:21 +0200

正確で客感的

リードの品質は色々な要素で異なります。

リード材の品質で大きく左右されます。
見た目だけでは判断できません。

リード材の内側が肝心です。
硬度計が客感的な数値を測定出来ます。。

リードのレベルアップと時間の節約につながります。

硬度計はアナログとデジタルから選べます。
精度は同じく、使い勝手に関してはデジタルがより簡単です

この持ち運び用バックに収納すれば
精密な硬度計も安全に
持ち運ぶことができます。
サイドのチャックを開ければ
必要な道具も収納することができます。

購入

analog oder digital

Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analog hardness tester, the dial has to be turned. The precision of both devices is the same.

私もして使用しています

オーボエ奏者にとって硬度計は不可欠なものです
私は、リーズンスタッフのものを愛用しています
とても素晴らしい製品です。

Albrecht Mayer
Principal Oboe Berliner Philharmoniker
(Foto: Matt Dine)

Why is the hardness tester so important?

First of all, the time saved in selecting suitable canes for you offers a great advantage. You save valuable working time that you would otherwise spend gouging, shaping, tying on and scraping canes that would not have given you a suitable result anyway. More important, however, is the fact that you can increase the quality of your reed making and get more reliable results.

Should the cane be measured dry or soaked?

It should be noted that only sufficiently dried cane will give useful results. It is not advisable to use soaked cane. It is best to note the test results on the cane and later on the staple. This will give you an overview of what works well for you personally.

In what stage should the cane be measured for hardness?

It is best to use the hardness tester after pregouging if you have a pregouging machine. The basic requirement is a smooth surface and a consistent thickness. If you use the small pregouger instead of a machine, you should test the cane after gouging.

Are the measuring results for pregouged cane the same as for gouged cane?

If the material is thicker, the measurement results will be higher.

What are the usual measuring results?

Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).

Are there different measurement results for the hardness testers?

Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.

Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?

Yes, the hardness testers have each been set up for a specific instrument. The heights of the support plate differ. The so-called arbour, on which the cane lies, is available individually, allowing you to convert your machine for other instruments.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured in any case. Also with gouged cane inaccurate measurement results may occur. For this reasons we do not recommend to double the hardness tester as a dial indicator.

What is the difference between the analog and digital hardness tester? Which one is more accurate?

Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analogue hardness tester, the dial has to be turned. The precision of both devices is the same. If required, you can connect the digital hardness tester to your computer to create personal statistics.

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Do not touch the new battery with your fingers, use a piece of cloth. The battery compartment is located on the upper left side of the dial gauge. Use a small screwdriver or the tip of a sharp knife to lift off the small plastic cover. Insert the new battery exactly as you found the old one. When inserting the new battery be careful not to touch, bend, or break the battery contacts (the small pieces of metal inside the dial gauge).
You can find detailed instructions here.

Does the oboe digital hardness test ever need to be recalibrated?

The hardness tester generally does not need to be recalibrated. Recalibration is only necessary if it has been damaged or if the locking screw that holds the dial gauge was accidentally loosened. Under normal conditions, no recalibration is required.

ガウジングマシーン〜 1,827.84 €

Wed, 07 Oct 2026 12:37:28 +0200

伝統的なドイツ式ガウジングマシーンここに新たに

よりよく、より正確に、より使いやすく。刃の交換も簡単に。

私たちのガウジングマシーンの比較

パッシーン	リーズンスタッフ	アメリカンスタイル	工業用

ケーンのカット
ケーン用ギロチン付き	ケーン用ギロチン付き	ケーン用ギロチン付き	–
ベッドの直径(mm)
10・10,5・11・12・12,5・15 ベッドの交換不可	10・10,5・10,75・11・12・12,5・13・14・15・16 ベットの交換可能他のサイズも注文可能	11 ベッドの交換不可	10・10,5・10,75・11・12・12,5・13・14・15・16 ベッドの交換可能他のサイズも注文可能
替え刃

ドイツスタイル	丸刃（特許取得済）刃を回転させ3つの位置で新しい切れ味に	アメリカスタイル（サイド厚め）	次より選択可能 ①ドイツスタイル ②丸刃（特許取得済・3つの位置で新しい切れ味に） ③アメリカスタイル（サイド厚め）
刃のセンタリング設定
センタリングは固定	センタリング設定済センタリング外し設定も可能（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）	センタリング設定済センタリング外し設定も可能 (センタリング外し設定用のキャリパー付) （=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）	センタリング設定済センタリング外し設定も可能（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）
ケーンの固定
クランプ２つバネはベッドの両端ケーンズレ防止用にベッドの両端はギザギザに加工	クランプ２つバネはベッドの両端ケーンズレ防止用にベッドの両端はギザギザに加工	クランプ２つバネはベッドの両端ケーンズレ防止用にベッドの両端はギザギザに加工	バキューム式ケーンズレ防止用にベッドの両端はギザギザに加工
大きさ(幅x高さx奥行)
21 x 11 x 11 cm	26 x 11,7 x 12 cm	26,5 x 14,5 x 13,5 cm	67 x 35 x 32 cm
重量
約 2,0 kg	約 2,5 kg	約 2,6 kg	約 35,5 kg
電圧
–	–	–	110V または 230 V
購入	購入	購入	購入

ミニキャリパー　アナログ 298.50 €

Fri, 09 Oct 2026 13:18:58 +0200

小さくて便利

今までは小さくて軽いのが特徴であった人気商品のミニ・キャリパーを改良しました！

台座の角度が自由自在に変えられる構造に進化しまして、一番見やすい角度に合わせられる様になりました

しかも、運搬の時には台座を真っ直ぐに出来て、普段持ち歩くリード工具入れに収納しやすくなりました。

キャリパー自体も回転させる事が出来て、右利き・左利きに設定出来ます。

先端部分をお選び下さい

先端部分 S, F, D は様々な角度から一つのポイントを計測するのに適しています。
球状になっている先端部分 K はリードやケーンをスライドさせても、
傷つける危険性がありません。

How can I set the dial indicator to ZERO?

The easiest way is to turn the dial so that the large pointer is back at ZERO. However, the dial indicator can also be recalibrated so that the large pointer is back at 12 o'clock. To do this, loosen the fastening screw that fixes the dial indicator in the dial indicator arm. Now position the dial indicator by moving it up or down so that both the small and large pointer show ZERO. When locking the screw do not tighten it too much, this can block the axle movement in the dial indicator.

Can I change the tip of the dial indicator?

Replacing the tip of the dial indicator is easy to do. You can simply turn out the tip that you have now with the help of pliers and replace it with the desired new tip. If there is not enough space between the tongue and the tip, you can loosen the screw that fixes the dial gauge in the dial gauge arm and remove the dial gauge from the arm. It may now be necessary to recalibrate the dial indicator.

Can I change the tongue of the dial indicator?

The tongue of the dial gauge can also be changed very easily. You can find instructions here.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured with the hardness tester. Inaccurate measurement results may occur also with gouged cane. For this reasons we do not recommend using the hardness tester as a dial indicator.

Can I transform my dial indicator from right to left-handed or do I need to buy a new one?

The dial indicator can easily be transformed from right to left-handed. Simply loosen the set screw at the end of the arm holding the dial. This will allow you to rotate the dial to face the opposite direction. Be sure to calibrate the height of the dial so it both touches the tongue and reads "0" before tightening the set screw. Make sure not over-tighten this screw as it will damage the actuating shaft and prevent the dial from operating properly.

Straight Shaper A.MAYER 184.00 €

Fri, 09 Oct 2026 15:51:02 +0200

This straight shaper was developed with Albrecht Mayer. The straight shaper is specifically adapted to his requirements and playing style. It differs significantly in size from his “ALMA” shape and offers a number of technical advantages.

“This Straight Shaper is the result of my experience, the reeds close perfectly, respond well in depth and lie relaxed in the mouth. I remove the ears if the cane is too soft. Then the sound becomes a little darker. This results in very stable reeds that are a pleasure to play.”

One of the notable features of this Straight Shaper is its elongated shape, which allows for an easier and more precise shaping process. This design ensures a repeatable and even placement of the cane. In addition, the so-called “ears” of the shaped canes can be cut with a cutter knife. Musicians who are often on the road can easily carry this tool in their tool bag.

Details of Albrecht Mayer's reeds

Mayer uses cane with a diameter of 10.75 to 11.00 mm and a hardness of 10 to 13 for his reeds. After gouging with the Gouging Machine PASSIN, the cane reaches a thickness of 0.55 - 0.56 mm. He uses a 46 mm long Glotin staple and the blanks have a length of 73 mm. After cutting, the reeds have a length of about 72.5 mm. Mayer prefers to tie his reeds in such a way that only minimal shortening is required to achieve a comfortable opening.
Mayer uses the template ALBI with a scrape length of approx. 9 - 10 mm.

Our Oboe Straight Shapers are engineered to replicate the most popular shapes from our renowned shaping machine; bringing trusted geometry and consistent results to a lightweight, portable tool.

Ideal for anyone seeking a lightweight, flexible, and cost-efficient tool with high precision. Whether you’re crafting reeds at home, in the studio, or on the go, these shapers deliver the same high standards of performance and craftsmanship found across all R’S tools.

Durable & Precise

The production of our Straight Shapers requires the highest level of precision and involves several elaborate machining steps. Modern CNC technology ensures an exact contour and consistently high quality.

Combined with a specially tailored hardening process, this results in exceptionally dimensionally stable and durable tools. The result is a hand-operated reed shaper that enables precise, comfortable, and reproducible work.

Variety of Shapes

Our range of straight shapers impresses with an exceptional variety of contours. From classic to custom, the different shapes deliver precise results and maximum creative freedom.

View all straight shapers

メーキングマシーン　型　#ALBI 414.31 €

Fri, 09 Oct 2026 15:53:05 +0200

This template was developed together with Albrecht Mayer.

Albrecht Mayer uses this template with the U8 Length of Scrape Limiter and the standard D tongue.

Reeds 'n Stuff/Reedolino/Reedmaking with Albrecht Mayer 商品

メーキングマシーン 2,047.18 €

A sharp blade, always.

持続できる切れ味

どこにでも

60日間テンプレートお試しできます

硬度計　デジタル 597.09 €

正確で客感的

analog oder digital

私もして使用しています

FAQ

ガウジングマシーン〜 1,827.84 €

伝統的なドイツ式ガウジングマシーンここに新たに

私たちのガウジングマシーンの比較

（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）

（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）

（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）

FAQ

ミニキャリパー　アナログ 298.50 €

小さくて便利

先端部分をお選び下さい

FAQ

Straight Shaper A.MAYER 184.00 €

Details of Albrecht Mayer's reeds

Durable & Precise

Variety of Shapes

メーキングマシーン　型　#ALBI 414.31 €

Reeds 'n Stuff/Reedolino/Reedmaking with Albrecht Mayer 商品

メーキングマシーン 2,047.18 €

A sharp blade, always.

持続できる切れ味

どこにでも

60日間テンプレートお試しできます

硬度計 デジタル 597.09 €

正確で客感的

analog oder digital

私もして使用しています

FAQ

ガウジングマシーン 〜 1,827.84 €

伝統的なドイツ式ガウジングマシーンここに新たに

私たちのガウジングマシーンの比較

（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）

（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）

（=かまぼこ型ケーンの内側に背骨が残るようにW形にガウジングも可能）

FAQ

ミニキャリパー アナログ 298.50 €

小さくて便利

先端部分をお選び下さい

FAQ

Straight Shaper A.MAYER 184.00 €

Details of Albrecht Mayer's reeds

Durable & Precise

Variety of Shapes

メーキングマシーン 型 #ALBI 414.31 €

硬度計　デジタル 597.09 €

ガウジングマシーン〜 1,827.84 €

ミニキャリパー　アナログ 298.50 €

メーキングマシーン　型　#ALBI 414.31 €