Reeds 'n Stuff/新製品/R'S PRINTS 商品

Bevel Tool 29.99 €

Wed, 14 Oct 2026 23:34:24 +0200

One For All

This muti-faceted Bevel Tool can be used in many ways, helping you bevel and sand your cane in any way you need. Use it in conjunction with the sanding tool to also sand the gouge side of the cane nice and smooth.

V-Style

With the sandpaper clamped between the two halves, you can take your cane and bevel your cane with the beloved V-style bevel. Tip: Hold the cane at an angle to get a tapered bevel.

Herzberg

The center section is designed specifically for a Herzberg style bevel. Place the sandpaper between the two halves so that the edge is flush with the edge of the tool, then go ahead and bevel your cane. The depth of the cutout is the exact length of the Herzberg-style bevel, and the angle at the back allows you to make the taper without shortening the bevel or having to make pencil marks.

Freedom

With a surface length of 30 mm, this upper section allows you to clamp the longer piece of sandpaper in and freely bevel on a flat surface in any way and length you would like.

Inside

Many reed makers prefer to sand the inside of the cane one last time to even out any possible inconsistencies, as well as lend some brightness and brilliance back to the sound. The rounded support holds the cane while you use the sanding tool to sand the gouge side of the cane nice and smooth.

折りたたみ工具 PRINTS 22.57 €

Wed, 21 Oct 2026 13:27:32 +0200

Ease and Consistency

- The R'S Prints folding tool offers the ultimate flexibility. Never worry about misaligned halves ever again.
- The length block slides into place in increments of 1 mm, allowing for cane from 76 to 94 mm in length to be easily folded in half.
- Slide the length block into place at the desired length, and fold your cane. The two pairs of lines on the front edge are there to help you to center your cane.

Sanding Tool 22.56 €

Wed, 21 Oct 2026 13:27:21 +0200

Smooth as Butter

Right before we fold the cane and build a blank is the last chance we have to work on the inside of the cane. The Sanding Tool is easy to use in multiple ways, giving us complete control of our reeds.

Inside

Many reed makers prefer to sand the inside of the cane one last time to even out any possible inconsistencies, as well as lend some brightness and brilliance back to the sound. The soft foam tubing allows the sandpaper to conform to any size gouge.

Outside

Looking to smooth out the outer contour of your shape? Fix a small bump, or blade wasn't quite as sharp as you thought? Simple fix: with the sanding tool you can easily smooth out the outer contour.

Edges

If you are looking to knock down the sharp corners on the inside of the cane, allowing the blades to better sit on top of and align with each other, the design of the sanding tool allows you to do so gently.

Extra

Each Sanding Tool comes with a few sheets of sandpaper. Replacement packs are also available. These sheets of P1000 sandpaper are cut to size and ready to use in the sanding tool. This sandpaper is designed to be used with soaked or dry cane, and is categorized as ultra-fine. This means it will not remove a lot of a cane, but rather smooth and polish the surface.

Trimming Guide for Bassoon Cane 22.56 €

Wed, 21 Oct 2026 13:27:19 +0200

Short and Sweet

Trimming the tube of your bassoon reeds has never been easier. The new Trimming Guide, designed by Matthew Harvell, allows you to precisely shorten the tube of your reeds, opening a new world of exploration and consistency. Gone are the days of measuring with a ruler, marking with a pencil, clipping by hand, and hoping everything lines up afterwards.

Set It

The jig fits inside the slot of the reed guillotine. Simply line up the end of the arm with the length you want for the tube.
The number on the jig reflects the length of the profiled portion of cane, so the arm shows where the profile ends and the tube begins.

Trim It

Place the fold of the cane against the stop on the jig, with the tube between the blades of the guillotine, and clip the tube to length.
Repeat the same for the other side and you are ready to form your blank with a shorter tube.

リードケース　HEXAGON 47.65 €

Tue, 06 Oct 2026 13:19:08 +0200

Perfectly Secure

Designed with both style and function in mind, the HEXAGON case is the perfect way to store your clarinet reeds. The case has been 3D-printed in one piece and the integrated hinges and clips allow your reed to be inserted and removed easily while keeping the reeds securely in place.

Flat

The glass panel keeps the underside of the reed perfectly flat while drying and storing the reeds. No twists, no turns, just straight perfection.

Safe

The built-in magnets make opening and closing the case a breeze, and ensure your reeds are stored safely in transit.

Kaleidoscope

The case is available in our trusted standard colors.
For those who love something special, we also offer exclusive colors such as Pavonina. Thanks to the tri-colored filament, each case is a unique piece with its own individual character.

折りたたみ工具 PRINTS 22.57 €

Sat, 10 Oct 2026 14:10:28 +0200

Ease and Consistency

- The R'S Prints folding tool offers the ultimate flexibility. Never worry about misaligned halves ever again.
- The length block slides into place in increments of 1 mm, allowing for cane from 118 to 150 mm in length to be easily folded in half.
- Slide the length block into place at the desired length, and fold your cane. The two pairs of lines on the front edge are there to help you to center your cane.

アクセサリーボックス 23.99 €

Wed, 21 Oct 2026 13:27:18 +0200

みんな一緒に

この便利なアクセサリーボックスは、シェーピングマシーン用のすべての付属品を整理するのに役立ちます。ブレードとハンドルのセット、ブレード調整用のツール、さらに最大3種類のシェイプを収納できるように設計されています。

生徒一人ひとりが自分専用のブレードやシェイプを持てる学校や、アクセサリーをより整理して保管したい方に最適です。マシン本体を購入する必要はありません。

リードケース　HEXAGON 43.51 €

Fri, 16 Oct 2026 12:43:53 +0200

リードケース「ヘクサゴン」
特別なデザインのリードケースです。
リードを安全に保管できます。
3Dプリンターで製造。
マグネット式で簡単に開け閉めできます。

New

With our new color variant Pavonina, you receive a unique reed case with shimmering green, blue, and sand tones. Thanks to the three-colored filament, each case is one of a kind.

リードケース　HEXAGON 40.94 €

Wed, 21 Oct 2026 13:28:05 +0200

New

With our new color variant Pavonina, you receive a unique reed case with shimmering green, blue, and sand tones. Thanks to the three-colored filament, each case is one of a kind.

Drying Board Pins 0.74 €

Sun, 05 Jul 2026 17:33:07 +0200

Lightweight and Flexible

The R'S PRINTS Drying Pins allow you to flexibly use your R'S PRINTS Drying Board for English horn, d’amore, and historical reeds as well. Simply insert the pins into the existing slots and twist them to secure.

Blade Sharpening Jig PRINTS 25.60 €

Wed, 21 Oct 2026 13:27:30 +0200

Never a Dull Blade

The R'S Prints blade sharpening jig makes sharpening your profiling blades easy. Place the blade into the jig, run it over your sharpening stone, and voila - like new.

Set up is simple:
place a piece of paper underneath the wheels, then place the blade so that it is touching the sharpening stone. Tighten the screw and the angle is all set.

Remove the piece of paper then run the jig over the stone several times until you see an even reflective surface on the bottom of the blade. This indicates that the blade has been properly sharpened.

Take the blade off the jig and place the flat side on the sharpening stone. After 3-5 to passes to remove the burr, and the blade is ready to go.

Drying Board PRINTS 14.37 €

Wed, 14 Oct 2026 13:17:07 +0200

Lightweight and Flexible

The R'S PRINTS drying board offers the ultimate flexibility.
Wells hold your oboe reed snugly in place, while the modular pins allow you convert the wells to hold English Horn, d'Amore, and historical reeds on the pins.

Each drying board comes standard with 5 pins included.
Extra pins are available in packs of 8.

Blade Sharpening Jig PRINTS 25.44 €

Wed, 21 Oct 2026 13:27:30 +0200

Never a Dull Blade

The R'S Prints blade sharpening jig makes sharpening your profiling blades easy. Place the blade into the jig, run it over your sharpening stone, and voila - like new.

Set up is simple:
place a piece of paper underneath the wheels, then place the blade so that it is touching the sharpening stone. Tighten the screw and the angle is all set.

Remove the piece of paper then run the jig over the stone several times until you see an even reflective surface on the bottom of the blade. This indicates that the blade has been properly sharpened.

Take the blade off the jig and place the flat side on the sharpening stone. After 3-5 to passes to remove the burr, and the blade is ready to go.

Reeds 'n Stuff/新製品/R'S PRINTS 商品

Bevel Tool 29.99 €

One For All

V-Style

Herzberg

Freedom

Inside

折りたたみ工具 PRINTS 22.57 €

Ease and Consistency

Sanding Tool 22.56 €

Smooth as Butter

Inside

Outside

Edges

Extra

Trimming Guide for Bassoon Cane 22.56 €

Short and Sweet

Set It

Trim It

リードケース HEXAGON 47.65 €

Perfectly Secure

Flat

Safe

Kaleidoscope

FAQ

折りたたみ工具 PRINTS 22.57 €

Ease and Consistency

アクセサリーボックス 23.99 €

みんな一緒に

リードケース HEXAGON 43.51 €

FAQ

リードケース HEXAGON 40.94 €

FAQ

Drying Board Pins 0.74 €

Lightweight and Flexible

Blade Sharpening Jig PRINTS 25.60 €

Never a Dull Blade

FAQ

Drying Board PRINTS 14.37 €

Lightweight and Flexible

Blade Sharpening Jig PRINTS 25.44 €

Never a Dull Blade

FAQ

リードケース　HEXAGON 47.65 €

リードケース　HEXAGON 43.51 €

リードケース　HEXAGON 40.94 €