Reeds 'n Stuff/Oboe/Reed Making Machines/Accessories and Blades/arundoMAX products

Spare Blade 100.25 €

Fri, 09 Oct 2026 15:50:43 +0200

A Revolution into the Future

After years of development, Reeds 'n Stuff is proud to offer the Blade 360°. When the blade becomes dull simply rotate to the next sharp section and continue profiling. This can be done at least 6 times, providing reeds and reeds of profiling before a replacement blade is needed.

The screw holding the blade is easily accessed from the underside, meaning once the height of the blade holder is set, you can set it and forget it. Simply loosen the screw, rotate the blade, and re-tighten the screw. Within seconds you can continue profiling reeds, rather than having to replace the entire blade.

To rotate the blade, first loosen the screw on the underside of the blade holder with the attached screwdriver.

Carefully rotate the blade to the next desired position.

Hold the blade in place while tightening the screw with the provided screwdriver and you are ready to profile.

Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.

FAQ 360° Blade

Tongue 148.91 €

Fri, 09 Oct 2026 13:20:34 +0200

The choice of tongue depends on
the preferred width, radius and tip of the reed.

To convert your profiling machine from one instrument to another, you'll need a tongue, a corresponding length of scrape limiter, a suitable mandrel and a template.

Service Set 12.11 €

Fri, 09 Oct 2026 15:50:53 +0200

A set of spare parts for the Blade 360° complete with:

1x screw driver tx6
1x screw M2.5

Screw Set 3.44 €

Fri, 09 Oct 2026 15:50:43 +0200

Spare Parts Storage.

We prepared a set of spare parts for your Profiling Machine.

16 2 length of scrape limiter screws

15 2 template screws

screw driver

Pen-Oiler 7.19 €

Fri, 09 Oct 2026 15:51:06 +0200

Versatile and reliable

Versatile in use as it neither becomes resinous nor ages. A reliable companion in machinery and tool manufacture, for corrosion protection, and as a cleaner, contact spray, lubricant and rust remover. Well suited for the maintenance and servicing of machine parts, as well the food industry (non-volatile ingredients are approved as additives according to the German Food and Consumer Goods Act).

Advantages

Prevents fine mechanical wear and prolongs the lifespan of chains, moving parts, and bearings
Cleans all machine parts right into the last gap
Lubricates all moving machine parts
Prevents current leakage on electrical components
Loosens rusted and jammed connections
Removes tar marks and protects against fingerprints
Neutralises leaked battery acid or hand perspiration
Cleans resin from planing machines, among other things
Rub it into your hands before starting work and you can easily remove oil and dirt

Environmental Compatibility

Biodegradable. Harmless for humans and nature. Plant friendly. Free from animal products.

Machine Oil 6.13 €

Fri, 09 Oct 2026 15:52:33 +0200

Squeaky clean

The classic multifunctional oil. Dissolves and protects against renewed corrosion.

Eliminates squeaking and creaking noises.

Cleans, preserves and lubricates permanently.

Suitable as a contact spray and displaces moisture.

Precision instrument oil, free of resin and acids.

With hanging tag.

Sealed with a leak proof sealing cap.

Provides precise dosage.

Swab from 7.00 €

Fri, 09 Oct 2026 13:20:51 +0200

This highend cleaning fibre is particular carefully, fluffy free and offers highest absorption. It is ideal for cleaning precision mechanics and flaps.

Blade 360° 183.30 €

Fri, 09 Oct 2026 15:50:43 +0200

A Revolution into the Future

To rotate the blade, first loosen the screw on the underside of the blade holder with the attached screwdriver.

Carefully rotate the blade to the next desired position.

Hold the blade in place while tightening the screw with the provided screwdriver and you are ready to profile.

Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.