Reeds 'n Stuff/Reedolino/What Bassoon Tools Should I Start With? products

Dial Indicator MINI 268.08 €

Wed, 07 Oct 2026 16:02:52 +0200

Practical and Portable

The mini dial indicator for bassoon is mini in size only. This newly concepted dial indicator is perfect for on stage, on the road, or on the reed desk.

With the lower arm folded up, the tongue of the dial is protected.

To rotate the lower arm, first pull the two gold parts apart until the pins are free. These pins keep the arm firmly in place in any of the chosen positions.

Then you can rotate it 90 degrees and it can stand on your desk to use as a regular dial indicator.

Rotate it again and the arm is now in a great position to lean against any surface for support while you hold the dial in your hand.

The Dial Indicator MINI can also stand equally well with the lower arm rotated into the other horizontal position.

How can I set the dial indicator to ZERO?

The easiest way is to turn the dial so that the large pointer is back at ZERO. However, the dial indicator can also be recalibrated so that the large pointer is back at 12 o'clock. To do this, loosen the fastening screw that fixes the dial indicator in the dial indicator arm. Now position the dial indicator by moving it up or down so that both the small and large pointer show ZERO. When locking the screw do not tighten it too much, as this can block the axle movement in the dial indicator.

Can I change the tip of the dial indicator?

Replacing the tip of the dial indicator is easy to do. You can simply turn out the tip that you have now with the help of pliers and replace it with the desired new tip. If there is not enough space between the tongue and the tip, you can loosen the screw that fixes the dial gauge in the dial gauge arm and remove the dial gauge from the arm. It may now be necessary to recalibrate the dial indicator.

Can I change the tongue of the dial indicator?

The tongue of the dial gauge can also be changed very easily. You can find instructions here.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured with the hardness tester. Inaccurate measurement results may occur also with gouged cane. For this reasons we do not recommend using the hardness tester as a dial indicator.

Can I transform my dial indicator from right to left-handed or do I need to buy a new one?

The dial indicator can easily be transformed from right to left-handed. Simply loosen the set screw at the end of the arm holding the dial. This will allow you to rotate the dial to face the opposite direction. Be sure to calibrate the height of the dial so it both touches the tongue and reads "0" before tightening the set screw. Make sure not over-tighten this screw as it will damage the actuating shaft and prevent the dial from operating properly.

Holding Mandrel COMPACT 25.49 €

Fri, 09 Oct 2026 15:51:00 +0200

Compact

Our compact series of mandrels is exactly the same as our full size mandrels, but with a smaller handle.

This smaller handle is designed for musicians who travel a lot, have smaller hands, or are just looking for a smaller handle on their reed making tools. It offers space savings while still providing enough handle to have a solid grip on the tool.

Safe and Secure

This compact holding mandrel allows you to have full control of both the reed and your tools during the finishing process.

Designed to hold your reeds and still allow ample space for a plaque, the holding mandrel gives you ultimate control of your work while keeping your fingers at a safe distance from any knives you may be using.

Also available separately as mandrels that fit with the drying board.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Holding Mandrel 25.49 €

Sat, 10 Oct 2026 19:37:38 +0200

Safe and Secure

This compact holding mandrel allows you to have full control of both the reed and your tools during the finishing process.

Also available separately as mandrels that fit with the drying board.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Reed Making Pliers 37.63 €

Sat, 10 Oct 2026 19:37:38 +0200

Comfort and control

With its lightness and comfortably coated handles
this tool fits well in the hand.
The ergonomic grip with springs makes for effortless work.
The hardened cutting surfaces and the box joint
guarantee exceptional durability.

Made in Germany. 3-year warranty.

- The shaft is specially made with
  an oval opening and smooth inner surfaces.
  
  With the pliers’ slender tips,
  you’ll be able to find the perfect position
  between the second and third wires.
- The hardened cutting surfaces are made
  according to DIN ISO 5746 standards
  to be particularly robust.
- The specially formed grip surfaces
  make it easy to grasp and twist wire.
- The high-quality workmanship
  and design even allow you to
  grip materials like thread.
- Our pliers feature a box joint,
  meaning that one handle is guided
  through the other on both sides.
  This ensures that the cutting edges will
  remain precisely aligned even
  after years of use.

Plaque R'S – Plastic 2.05 €

Thu, 01 Oct 2026 12:41:29 +0200

The R'S plastic reed plaque is a practical tool for precision bassoon reed making. Its convexed shape provides a stable and reliable support for the knife, allowing for controlled removal of material when working on the reed. The smooth plastic surface supports precise and delicate work.

The reed plaque is available in various colors.

Compact Caliper DIGITAL 23.50 €

Fri, 09 Oct 2026 15:53:01 +0200

Digital caliper made of Steel with fixation screw. Easy to take with in a tool pouch. Allows you to switch between inch and millimeter. It comes with a black plastic case.

Sanding Stick BECO 14.36 €

Sun, 20 Sep 2026 14:05:16 +0200

Leightweight and Precise

The BECO sanding stick is ideal for traveling and perfect for accurately sanding the reeds. Thanks to its compact size and low weight, it fits in any hand baggage. Even security checks at the airport are no problem with this tool.

The sanding stick is supplied with one sanding belt and has a round and a pointed end. This makes it easy to work in hard-to-reach areas. The sharpening belt is tensioned by a spring and held securely in place by the guide groove. This allows is to be turned a little further without any problems when the grain at the tip is used up. Replacing the sanding belt is simple and also done by activating the spring.

Replacement belts are available in packs of 5.

Half-round Diamond File from 28.77 €

Wed, 07 Oct 2026 16:05:10 +0200

Journal 5.47 €

Fri, 09 Oct 2026 15:51:53 +0200

Record. Compare. Improve. Share.

The R’S Reed Journal is the ideal tool for documenting your reed-making process. Record essential measurements, compare reeds at a glance, and preserve your favorite designs for future use.

– Structured fields for all important data points
– Integrated graph for profile or thickness measurements
– Space for personal notes on playability, tone, response, or whatever unique observations matter to you.

Perfect for students, teachers, and professionals alike - the Reed Journal helps you track, refine, and share your reed-making progress with ease.

Reeds 'n Stuff/Reedolino/What Bassoon Tools Should I Start With? products

Dial Indicator MINI 268.08 €

Practical and Portable

FAQ

Holding Mandrel COMPACT 25.49 €

Compact

Safe and Secure

Ergonomic

Holding Mandrel 25.49 €

Safe and Secure

Ergonomic

Reed Making Pliers 37.63 €

Comfort and control

Plaque R'S – Plastic 2.05 €

Compact Caliper DIGITAL 23.50 €

Sanding Stick BECO 14.36 €

Leightweight and Precise

Half-round Diamond File from 28.77 €

Journal 5.47 €

Record. Compare. Improve. Share.