Reeds 'n Stuff/Bassoon/Reed Making Supplies/Tools products

Bevel Tool 29.99 €

Sat, 10 Oct 2026 14:10:28 +0200

One For All

This muti-faceted Bevel Tool can be used in many ways, helping you bevel and sand your cane in any way you need. Use it in conjunction with the sanding tool to also sand the gouge side of the cane nice and smooth.

V-Style

With the sandpaper clamped between the two halves, you can take your cane and bevel your cane with the beloved V-style bevel. Tip: Hold the cane at an angle to get a tapered bevel.

Herzberg

The center section is designed specifically for a Herzberg style bevel. Place the sandpaper between the two halves so that the edge is flush with the edge of the tool, then go ahead and bevel your cane. The depth of the cutout is the exact length of the Herzberg-style bevel, and the angle at the back allows you to make the taper without shortening the bevel or having to make pencil marks.

Freedom

With a surface length of 30 mm, this upper section allows you to clamp the longer piece of sandpaper in and freely bevel on a flat surface in any way and length you would like.

Inside

Many reed makers prefer to sand the inside of the cane one last time to even out any possible inconsistencies, as well as lend some brightness and brilliance back to the sound. The rounded support holds the cane while you use the sanding tool to sand the gouge side of the cane nice and smooth.

Folding Tool PRINTS 22.57 €

Fri, 09 Oct 2026 15:51:09 +0200

Ease and Consistency

- The R'S Prints folding tool offers the ultimate flexibility. Never worry about misaligned halves ever again.
- The length block slides into place in increments of 1 mm, allowing for cane from 76 to 94 mm in length to be easily folded in half.
- Slide the length block into place at the desired length, and fold your cane. The two pairs of lines on the front edge are there to help you to center your cane.

Trimming Guide for Bassoon Cane 22.56 €

Sat, 10 Oct 2026 13:40:28 +0200

Short and Sweet

Trimming the tube of your bassoon reeds has never been easier. The new Trimming Guide, designed by Matthew Harvell, allows you to precisely shorten the tube of your reeds, opening a new world of exploration and consistency. Gone are the days of measuring with a ruler, marking with a pencil, clipping by hand, and hoping everything lines up afterwards.

Set It

The jig fits inside the slot of the reed guillotine. Simply line up the end of the arm with the length you want for the tube.
The number on the jig reflects the length of the profiled portion of cane, so the arm shows where the profile ends and the tube begins.

Trim It

Place the fold of the cane against the stop on the jig, with the tube between the blades of the guillotine, and clip the tube to length.
Repeat the same for the other side and you are ready to form your blank with a shorter tube.

Sandpaper Sheets 7.25 €

Fri, 09 Oct 2026 15:50:59 +0200

Ready to Go

These sheets of P1000 sandpaper are cut to size and ready to use in the Sanding Tool. This sandpaper is designed to be used with soaked or dry cane, and is categorized as ultra-fine. This means it will not remove a lot of a cane, but rather smooth and polish the surface.

Sanding Tool 22.56 €

Fri, 09 Oct 2026 15:50:59 +0200

Smooth as Butter

Right before we fold the cane and build a blank is the last chance we have to work on the inside of the cane. The Sanding Tool is easy to use in multiple ways, giving us complete control of our reeds.

Inside

Many reed makers prefer to sand the inside of the cane one last time to even out any possible inconsistencies, as well as lend some brightness and brilliance back to the sound. The soft foam tubing allows the sandpaper to conform to any size gouge.

Outside

Looking to smooth out the outer contour of your shape? Fix a small bump, or blade wasn't quite as sharp as you thought? Simple fix: with the sanding tool you can easily smooth out the outer contour.

Edges

If you are looking to knock down the sharp corners on the inside of the cane, allowing the blades to better sit on top of and align with each other, the design of the sanding tool allows you to do so gently.

Extra

Each Sanding Tool comes with a few sheets of sandpaper. Replacement packs are also available. These sheets of P1000 sandpaper are cut to size and ready to use in the sanding tool. This sandpaper is designed to be used with soaked or dry cane, and is categorized as ultra-fine. This means it will not remove a lot of a cane, but rather smooth and polish the surface.

Sanding Stick BECO 14.36 €

Sun, 20 Sep 2026 14:05:16 +0200

Leightweight and Precise

The BECO sanding stick is ideal for traveling and perfect for accurately sanding the reeds. Thanks to its compact size and low weight, it fits in any hand baggage. Even security checks at the airport are no problem with this tool.

The sanding stick is supplied with one sanding belt and has a round and a pointed end. This makes it easy to work in hard-to-reach areas. The sharpening belt is tensioned by a spring and held securely in place by the guide groove. This allows is to be turned a little further without any problems when the grain at the tip is used up. Replacing the sanding belt is simple and also done by activating the spring.

Replacement belts are available in packs of 5.

Scoring Tool from 85.91 €

Wed, 07 Oct 2026 16:03:15 +0200

Well rounded

A six-bladed tool for scoring the ends of bassoon cane to aid in forming the tube.
The blades are interchangeable, and a durable protective cover shields your fingers while not in use.

The distance between the outer blades is 7mm on both models.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Tool Bag R'S COMPACT 68.24 €

Fri, 09 Oct 2026 15:51:08 +0200

Secure, Compact, Stylish

Our compact tool bag allows you to store your reed-making tools with ease. The smaller size is perfectly suited for our Compact Tool Series. Our mini dial indicators for Bassoon and Oboe also fit securely inside and can be transported safely.

Inside the bag, various elastic loops are available to hold your tools in place. Of course, you may also carry your tools loosely if preferred. Smaller parts can be stored in the separate inner pocket. Scraping tongues, tubes, and other small items can be safely kept in the outer pocket with zipper closure.

A special highlight is the additional strap, which allows the tool bag to be attached to backpacks or suitcases or simply worn comfortably over the shoulder.

The exterior is made of durable, hard-wearing nylon, while the interior is lined with robust cowhide leather.

Journal 5.47 €

Fri, 09 Oct 2026 15:51:53 +0200

Record. Compare. Improve. Share.

The R’S Reed Journal is the ideal tool for documenting your reed-making process. Record essential measurements, compare reeds at a glance, and preserve your favorite designs for future use.

– Structured fields for all important data points
– Integrated graph for profile or thickness measurements
– Space for personal notes on playability, tone, response, or whatever unique observations matter to you.

Perfect for students, teachers, and professionals alike - the Reed Journal helps you track, refine, and share your reed-making progress with ease.

Folding Tool PRINTS 22.57 €

Sat, 10 Oct 2026 14:10:28 +0200

Ease and Consistency

- The R'S Prints folding tool offers the ultimate flexibility. Never worry about misaligned halves ever again.
- The length block slides into place in increments of 1 mm, allowing for cane from 118 to 150 mm in length to be easily folded in half.
- Slide the length block into place at the desired length, and fold your cane. The two pairs of lines on the front edge are there to help you to center your cane.

DoubleGeek BULLET 117.19 €

Fri, 09 Oct 2026 15:50:57 +0200

The DoubleGeek tools are focused on the needs of the double reed players. They are perfect for students, schools, and are also travel safe. The tools come with interchangeable handles in different sizes for best control. In addition, they can be used for both natural and synthetic reeds.

The Bullet - A stand alone, handle-less tool

ReedGeek’s newest and most advanced tool to date offers its user ground breaking advances in reed adjustment and maintenance. It is the most effective tool for the adjustment of synthetic polymer reeds, both single and double reeds, not to mention its effortless cut on natural cane. Utilizing advanced aerospace diamond-like alloys, the ReedGeek bullet exhibits an edge of 94 RC hardness and is machined to tolerances closer than virtually any reed or woodworking tool on the market today. This precision allows double reed players to adjust tip contours to achieve maximum vibration without damage to the reed or its tip. With a built-in shank file, for burnishing and smoothing, every surface of the Bullet can be used for great efficiency.

DoubleGeek GEN2 117.19 €

Fri, 07 Aug 2026 12:57:57 +0200

The DoubleGeek tools are focused on the needs of the double reed players. They are perfect for students, schools and are also travel safe. The tools comes with interchangeable handles in different sizes for best control. In addition, they can be used for both natural and synthetic reeds.

DoubleGeek GEN2

Like the successful Universal tools, the GEN2 set is engineered with two oversized bevels allowing double reed players to fine tune reed spines, corners, and tips with efficiency and ease (12 unique cutting surfaces in all). The DoubleGeek GEN2 is available in a Black Diamond finish as well as in Chromium. It is encased in a deluxe, proprietary neoprene bag with a sewn-in microfiber cleaning cloth, a water tight case. For added leverage and familiarity in the hand the set includes a 3 inch stainless steel handle and a small black palm handle, both threaded for easy attachment to the DoubleGeek.

DoubleGeek EDGE & CURVE 170.86 €

Fri, 09 Oct 2026 15:50:57 +0200

The DoubleGeek tools are focused on the needs of the double reed players. They are perfect for students, schools, and are also travel safe. The tools comes with interchangeable handles in different sizes for best control. In addition, they can be used for both natural and synthetic reeds.

DoubleGeek EDGE & CURVE

These revolutionary tips offer the user unique scraping edges and bevels that provide a very direct cut and remove cane both rapidly and smoothly without chatter. They are excellent for shaping and profiling oboe and bassoon reeds before using your DoubleGeek GEN2 for ultra-fine finishing. Both tips include the front pencil eraser scraping and blending tip. The Curve is truly unique in that it possesses two pronounced and varying shaped side scraping bevels for spine and channel profiling. Both tips affix to any standard ReedGeek threaded handle. the Edge & Curve kit includes both tips, tall stainless and black palm handles, a neoprene bag and a case.

Reed Stick 30.99 €

Fri, 09 Oct 2026 15:51:07 +0200

The Vandoren reed stick, inspired by a reed rush, is also made of etched glass and enables players to precisely customize and personalize their reeds. The shape of the tip is specially designed for precise scraping.

Sanding Belts BECO 16.72 €

Thu, 08 Oct 2026 20:41:40 +0200

The sanding belts from BECO are available in two different grain sizes and fits on the Sanding Stick BECO. The sanding belts can be used regardless of the color of the sanding stick.

Each package contains 5 sanding belts.

Round Diamond File from 33.21 €

Wed, 07 Oct 2026 16:03:16 +0200

Flat File 19.44 €

Thu, 08 Oct 2026 19:19:55 +0200

Swiss precision needle files meet the highest standards of shape accuracy, cutting precision, filing performance, and durability.
They are made from special steel for precision files with high wear resistance (65-66 HRC).

Half-round Diamond File from 28.77 €

Wed, 07 Oct 2026 16:05:10 +0200

Easel 28.37 €

Fri, 09 Oct 2026 15:51:06 +0200

for Bassoon

Ebony Concave Easel 28.31 €

Fri, 09 Oct 2026 15:51:06 +0200

Here you can order the bathing easel for the cane scraper.
With the scraper you can scrape upstanding wood fibres from shaped cane.

Cane Scraper 36.30 €

Fri, 09 Oct 2026 15:51:06 +0200

With this scraper you can scrape upstanding wood fibres from shaped cane.
We recommend to order the matching easel.

Screw Driver 13.27 €

Fri, 09 Oct 2026 15:53:01 +0200

Includes 3 interchangeable tips.

LED Table Lamp 25.59 €

Fri, 09 Oct 2026 15:53:02 +0200

Portable Illumination

30 LEDs provide illumination for your reedmaking needs.
This Reed Making Lamp shines at 180 Lumen with a slightly cold/white light (6.000 - 7.000 K).
This lamp is height adjustable and has two brightness settings, allowing you to find the optimal position and brightness for your reed making needs.

This lamp is can be powered either by 4x AAA Batteries (not included) or by the included 110 cm long USB cable.

Reed Making Pliers 37.63 €

Sat, 10 Oct 2026 13:11:25 +0200

Comfort and control

With its lightness and comfortably coated handles
this tool fits well in the hand.
The ergonomic grip with springs makes for effortless work.
The hardened cutting surfaces and the box joint
guarantee exceptional durability.

Made in Germany. 3-year warranty.

- The shaft is specially made with
  an oval opening and smooth inner surfaces.
  
  With the pliers’ slender tips,
  you’ll be able to find the perfect position
  between the second and third wires.
- The hardened cutting surfaces are made
  according to DIN ISO 5746 standards
  to be particularly robust.
- The specially formed grip surfaces
  make it easy to grasp and twist wire.
- The high-quality workmanship
  and design even allow you to
  grip materials like thread.
- Our pliers feature a box joint,
  meaning that one handle is guided
  through the other on both sides.
  This ensures that the cutting edges will
  remain precisely aligned even
  after years of use.

Scoring Tool 93.33 €

Fri, 09 Oct 2026 15:51:06 +0200

Well rounded

A seven-bladed tool for scoring the ends of contra bassoon cane to aid in forming the tube.
The blades are interchangeable, and a durable protective cover shields your fingers while not in use.

The distance between the outer blades is 9mm on this model.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Pregouger 176.69 €

Sun, 02 Aug 2026 03:05:16 +0200

Small pregouger with pusher.

The cane bed diameters are:
Bassoon - 26 mm
Contrabassoon - 32 mm

Reed Tool Brush 5.57 €

Fri, 09 Oct 2026 15:51:07 +0200

Like new

Finally, a solution to the age old question:
how do I best clean my reamers?

Simply brush it away!

- This brush will painlessly remove all those years of cane
  residue from both your spiral and diamond reamers.
- Also works on files and diamond files.

Tool Bag R'S 102.36 €

Fri, 09 Oct 2026 15:51:07 +0200

Safe and stylish

The ultimate in flexibility: you can easily store your reed making tools in our handy tool bag. Inside the bag there are various elastic bands for securing your tools. You can also transport your tools loosely in the tool bag.
Smaller items can fit into the separate inner compartment.

You can safely store files, plaques, pencils, and other small parts in the outer compartment of the tool bag using the zipper.

The outside of the tool bag is made of a durable nylon fabric. The inner part is lined with elegant and robust leather.