Reeds 'n Stuff/Spare Blades products

Blade from 105.53 €

Fri, 02 Oct 2026 13:16:30 +0200

for Bassoon & Contrabassoon Cane Cutter

Spare Blade 100.25 €

Fri, 23 Oct 2026 15:59:58 +0200

A Revolution into the Future

After years of development, Reeds 'n Stuff is proud to offer the Blade 360°. When the blade becomes dull simply rotate to the next sharp section and continue profiling. This can be done at least 6 times, providing reeds and reeds of profiling before a replacement blade is needed.

The screw holding the blade is easily accessed from the underside, meaning once the height of the blade holder is set, you can set it and forget it. Simply loosen the screw, rotate the blade, and re-tighten the screw. Within seconds you can continue profiling reeds, rather than having to replace the entire blade.

To rotate the blade, first loosen the screw on the underside of the blade holder with the attached screwdriver.

Carefully rotate the blade to the next desired position.

Hold the blade in place while tightening the screw with the provided screwdriver and you are ready to profile.

Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.

FAQ 360° Blade

Blade Pair 42.79 €

Fri, 23 Oct 2026 15:59:58 +0200

After intense research a new generation of shaping machine blades is now available.
To achieve highest endurance, the updated blades undergo a new double angle grinding process, as well as an improved hardening process.
This leads to cleaner cuts and a maximum lifespan.

And the best is: Even the price is sharper than before.

As always our shaping machine blades fit all common shaper machines.

We do not offer a resparpening service for the new blades.

Spare Blade 178.39 €

Wed, 21 Oct 2026 13:28:33 +0200

Accurate in three positions

Our patented cylindrical blade's total circumference
can be used in three positions.
A single screw holds the blade positively locked in place.
Because of its cylindrical form,
the blade is exactly positioned whenever you mount it.

Turning the Blade

Please turn the blade when the part of the blade is blunt.
Open the screw at the blade holder.
Turn the blade to the next hole and lock the screw.

You will find the blade size engraved on
the blade holder of your gouging machine.

Possible Blade Sizes

for our Gouging Machine Reeds 'n Stuff

Please choose a blade size
relating to your bed diameter.

Bed Diameter	EU Standard	US Standard	Other Possibilities
10.00	10.91	–	9.60; 10.20; 10.55; 10.73; 10.80
10.50	11.41	10.55	10.91; 11.15; 11.30; 11.60; 11.70
10.75	11.60	10.73	10.91; 11.15; 11.30; 11,41; 11.70
11.00	11.98	11.15	11.80; 11.91; 12.02; 12.20
11.50	12.50	11.60	12.02; 12.20; 12.70; 12.85
12.00 (Wiener Oboe)	12.02	–	–
12.00 (Englischhorn)	12.85	12.20	12.50; 12.70; 13.10 (JP); 13.41
12.50 (Englischhorn)	13.41	12.50	12.70; 12.85; 13.10
13.00 (Barockoboe)	15.10	–	15.80
14.00 (Barockoboe)	15.80	–	15.10; 16.10; 16.30
15.00 (Barockoboe)	16.50	–	16.10; 16.30; 16.75; 17.60
16.00 (Barockoboe)	18.25	–	16.50; 16.75; 17.60

Attention:
Larger Blade= Thinner Sides
Smaller Blade = Thicker Sides

A change in blade diameter of 0.1mm will change the thickness at the sides of the gouge by about 0.01mm.

Spare Blade 170.60 €

Fri, 23 Oct 2026 16:01:29 +0200

for AMERICAN STYLE Gouging Machine

Spare Blade 170.60 €

Fri, 16 Oct 2026 12:44:22 +0200

Your Blade Size

To find the correct blade size
please have a look at the engraving on the carriage of your machine.
To get precise results the blade size and the carriage size need to match.

Blade Size 10.9 for Machine Diameter 10.0 mm

Blade Size 11.0 for Machine Diameter 10.0 mm

Blade Size 11.4 for Machine Diameter 10.5 mm

Blade Size 11.8 for Machine Diameter 11.0 mm

Blade Size 12.0 for Machine Diameter 11.0 mm

Blade Size 13.0 for Machine Diameter 12.0 mm

Blade Size 13.5 for Machine Diameter 12.5 mm

Blade Size 16.3 for Machine Diameter 15.0 mm

Spare Blade from 129.61 €

Fri, 23 Oct 2026 08:48:44 +0200

Your choice

You have the choice between our standard blade made of HSS
and the carbide blade.

Both variants have their advantages.
Blades made of HSS (High Speed Steel) achieve a higher sharpness
and are easy to resharpen.

Carbide blades have an extremely long lasting sharpness.
Sharpening them is more difficult and requires a diamond stone
because the material is extremely hard.

Spare Blade 176.41 €

Thu, 22 Oct 2026 13:18:38 +0200

for Bassoon & Contrabassoon Gouging Machine

Spare Blade 128.28 €

Fri, 23 Oct 2026 16:01:29 +0200

for Clarinet & Saxophone Gouging Machine

Blade Pair 117.70 €

Fri, 23 Oct 2026 16:01:30 +0200

Clarinet & Saxophone Shaping Machine

Round Blade 163.97 €

Thu, 22 Oct 2026 13:18:38 +0200

Blade Diameters

Please choose a blade size
relating to your bed diameter.

Bed Diameter	Blade Size
10,00	11,50 or 12,11 (Standard)
10,50	12,84
10,75	12,84
11,00	12,84
11,50	12,84
12,00 (English Horn / Viennes Oboe)	13,56
12,50 (English Horn)	13,56
13,00 (Baroque Oboe)	14,82
14,00 (Baroque Oboe)	15,56
15,00 (Baroque Oboe)	15,56
16,00 (Baroque Oboe)	15,56

Round Blade 176.41 €

Fri, 02 Oct 2026 11:35:38 +0200

for Bassoon Pregouging Machine

Side Trim Blade 95.22 €

Fri, 23 Oct 2026 16:01:29 +0200

for Oboe Pregouging Machine

Side Trim Blade 89.93 €

Fri, 23 Oct 2026 16:01:27 +0200

for Bassoon, Contrabassoon & Clarinet Pregouging Machine

Upper Blade 72.32 €

Fri, 23 Oct 2026 16:01:28 +0200

Use this upper blade for your cane cutter in diameters from 10.00 mm to 16.00 mm.

Please order two pieces as pair if you need the blades for our industrial cane cutter.
In the industrial machine this blade can only be use in cane diameters from 9.50 mm to 11.50.

Lower Blade 72.32 €

Fri, 16 Oct 2026 12:44:22 +0200

With this blade you can change the diameter of cane used with the guillotine.

German steel, hardened.

Lower Blade Pair 173.12 €

Thu, 14 May 2026 23:58:36 +0200

With this pair of lower blades you can change the cane diameter of your industrial cane cutter.
If you also want to change the bed length, we offer pairs of spacer plates.

Blade Resharpening from 59.01 €

Tue, 20 Oct 2026 13:11:30 +0200

How to Order a Resharpening

Order

Order the amount of your blunt blades on our webshop.
Send

Send your blades to:

Reeds 'n Stuff GmbH
Karlsbader Strasse 88 c
09465 Cranzahl
Germany

Please include a copy of your order or note your order number.

Please note that import charges will be added by the shipping service provider if you have not indicated on the customs document the contents of the shipment or if the amount was stated too high.
Receive

After we received your blades we will resharpe and return them to the given delivery address.

Blade Resharpening 141.93 €

Fri, 23 Oct 2026 16:01:39 +0200

How to Order a Resharpening

Order

Order the amount of your blunt blades on our webshop.
Send

Send your reed guillotine to:

Reeds 'n Stuff GmbH
Karlsbader Strasse 88 c
09465 Cranzahl
Germany

Please include a copy of your order or note your order number.

Please note that import charges will be added by the shipping service provider if you have not indicated on the customs document the contents of the shipment or if the amount was stated too high.
Receive

After we received your guillotine we will resharpe and return it to the given delivery address.

Blade Resharpening from 49.56 €

Fri, 15 May 2026 00:01:14 +0200

How to Order a Resharpening

Order

Order the amount of your blunt blades on our webshop.
Send

Send your blades to:

Reeds 'n Stuff GmbH
Karlsbader Strasse 88 c
09465 Cranzahl
Germany

Please include a copy of your order or note your order number.

Please note that import charges will be added by the shipping service provider if you have not indicated on the customs document the contents of the shipment or if the amount was stated too high.
Receive

After we received your blades we will resharpe and return them to the given delivery address.

Blade 360° 183.30 €

Fri, 23 Oct 2026 15:59:58 +0200

A Revolution into the Future

To rotate the blade, first loosen the screw on the underside of the blade holder with the attached screwdriver.

Carefully rotate the blade to the next desired position.

Hold the blade in place while tightening the screw with the provided screwdriver and you are ready to profile.

Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.

Reeds 'n Stuff/Spare Blades products

Blade from 105.53 €

Spare Blade 100.25 €

A Revolution into the Future

FAQ 360° Blade

Blade Pair 42.79 €

FAQ

Spare Blade 178.39 €

Accurate in three positions

Turning the Blade

Possible Blade Sizes

for our Gouging Machine Reeds 'n Stuff

Spare Blade 170.60 €

Spare Blade 170.60 €

Your Blade Size

Spare Blade from 129.61 €

Your choice

Spare Blade 176.41 €

Spare Blade 128.28 €

Blade Pair 117.70 €

Round Blade 163.97 €

Blade Diameters

Round Blade 176.41 €

Side Trim Blade 95.22 €

Side Trim Blade 89.93 €

Upper Blade 72.32 €

Lower Blade 72.32 €

Lower Blade Pair 173.12 €

Blade Resharpening from 59.01 €

How to Order a Resharpening

Order

Send

Receive

FAQ

Blade Resharpening 141.93 €

How to Order a Resharpening

Order

Send

Receive

Blade Resharpening from 49.56 €

How to Order a Resharpening

Order

Send

Receive

FAQ

Blade 360° 183.30 €

A Revolution into the Future

FAQ 360° Blade