Reeds 'n Stuff/Bassoon/SALE products

Digital Dial Indicator (B-Stock) 360.69 €

Fri, 15 May 2026 00:00:42 +0200

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Quality and Control

Precision, durability, and reliability characterize Reeds 'n Stuff dial indicators.

Achieve consistently good results by measuring the thickness of your cane.
The markings on the tongue help to determine identical measuring points between reeds, which allows you to check the profile and symmetry of the reeds.

The dial and the lifting lever can be rotated to any desired position.
The dial indicator is therefore suitable for both right-handed and left-handed people.

Our dial indicators are available in both analog or digital formats.
The precision of both devices is the identical, the only difference lies in the convenience of use.

New

Curved

The newly designed tongue is slightly curved.
This enables precise measurement results along the entire blade.

New

Highly Accurate

The new side contour at the tip of the tongue tapers towards the front to allow pinpoint measurements on the sides of the tube.

For Upgrading

The new tongue is also available separately so it can be installed in your dial indicator.

Buy

Swap It Out

Learn how to do so on the Support page.

The Tip of Your Choice

Choose among tips S (Standard for bassoon and the mini dial indicator), F, and D to see the point you are measuring from every perspective and to measure exactly at a given point. Choose the ball-pointed tip K for a smooth glide when you pull the cane or reed through, as well as to measure gouged cane.

The Reeds 'n Stuff transport case features a simple design that's easy to use. The foam interior provides a snug fit for safe transportation. Tools can be stored in the zippered compartment on top of the case. The handle provides portability wherever you need it.

Buy

Can I change the tip of the dial indicator?

Replacing the tip of the dial indicator is easy to do. You can simply turn out the tip that you have now with the help of pliers and replace it with the desired new tip. If there is not enough space between the tongue and the tip, you can loosen the screw that fixes the dial gauge in the dial gauge arm and remove the dial gauge from the arm. It may now be necessary to recalibrate the dial indicator.

Can I change the tongue of the dial indicator?

The tongue of the dial gauge can also be changed very easily. You can find instructions here.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured with the hardness tester. Inaccurate measurement results may occur also with gouged cane. For this reasons we do not recommend using the hardness tester as a dial indicator.

Can I transform my dial indicator from right to left-handed or do I need to buy a new one?

The dial indicator can easily be transformed from right to left-handed. Simply loosen the set screw at the end of the arm holding the dial. This will allow you to rotate the dial to face the opposite direction. Be sure to calibrate the height of the dial so it both touches the tongue and reads "0" before tightening the set screw. Make sure not over-tighten this screw as it will damage the actuating shaft and prevent the dial from operating properly.

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Do not touch the new battery with your fingers, use a piece of cloth. The battery compartment is located on the upper left side of the dial gauge. Use a small screwdriver or the tip of a sharp knife to lift off the small plastic cover. Insert the new battery exactly as you found the old one. When inserting the new battery be careful not to touch, bend, or break the battery contacts (the small pieces of metal inside the dial gauge).
You can find detailed instructions here.

Does the oboe digital hardness test ever need to be recalibrated?

The hardness tester generally does not need to be recalibrated. Recalibration is only necessary if it has been damaged or if the locking screw that holds the dial gauge was accidentally loosened. Under normal conditions, no recalibration is required.

Synthetic Reed (SALE) 13.99 €

Tue, 13 Oct 2026 13:16:38 +0200

A bassoon reed for beginners only. Longer lasting than cane.

Barrel (B-Stock) from 225.63 €

Thu, 14 May 2026 23:59:55 +0200

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Your Barrel – Your Choice

Create your very own profiling machine for bassoon.

By choosing the barrel that best suits your needs, you can define the profile of your profiled cane.
You can choose between an eccentric or concentric profile.
The eccentric barrel for bassoon has a change in thickness from the center to the outside edge of the barrel of about 0.30 mm, whereas the concentric barrel maintains a constant thickness from center to edge.

In addition to our standard barrels there are three other variants, each with a more defined spine in the middle of the blade.

Spine + is 0.26 mm thicker at the spine
Spine ++ is 0.48 mm thicker at the spine
Spine +++ is 0.55 mm thicker at the spine

- The length stop integrated into the barrel makes it even easier to position the cane.
  The position of the length stop is variable so that you can adjust it to different cane lengths.
- For profiles with a more pronounced spine, there are special barrels with beveled pins.
  You can choose between three variants in addition to our standard one to get your favorite result.
- You can create a complete exchange set for your barrel. The clamp rings and the rotating handle are not included in the scope of delivery of the single barrel.
  You can get the clamp rings as well as the rotating handle separately as accessories.
  Please note that the clamp rings for bassoon and contrabassoon have different sizes.

Digital Hardness Tester (SALE) 389.94 €

Fri, 23 Oct 2026 16:01:21 +0200

These digital hardness testers feature a slightly thicker dial compared to our standard models, yet they offer the same reliable functionality and precise measurement results.

Quality over Quantity

The characteristics of the cane have a significant influence on the success of our reed making. The appearance of the cane is often deceptive and we quickly learn:
The truth lies beneath the surface.

The hardness tester offers an objective way to judge the quality, not just the quantity of cane. By measuring the hardness of the cane at both ends we are able to discern whether a piece of cane has the same qualities throughout the entire piece. This way we can ensure that the two blades of a reed will vibrate similarly.

Save yourself valuable time and increase the quality of your reed making.
Achieve reliable and repeatable results.

Our hardness testers are available in both analog or digital formats.
The precision of both devices is identical, the only difference lies in the convenience of use.

Why is the hardness tester so important?

First of all, the time saved in selecting suitable canes for you offers a great advantage. You save valuable working time that you would otherwise spend gouging, shaping, tying on and scraping canes that would not have given you a suitable result anyway. More important, however, is the fact that you can increase the quality of your reed making and get more reliable results.

Should the cane be measured dry or soaked?

It should be noted that only sufficiently dried cane will give useful results. It is not advisable to use soaked cane. It is best to note the test results on the cane and later on the staple. This will give you an overview of what works well for you personally.

In what stage should the cane be measured for hardness?

It is best to use the hardness tester after pregouging if you have a pregouging machine. The basic requirement is a smooth surface and a consistent thickness. If you use the small pregouger instead of a machine, you should test the cane after gouging.

Are the measuring results for pregouged cane the same as for gouged cane?

If the material is thicker, the measurement results will be higher.

What are the usual measuring results?

Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).

Are there different measurement results for the hardness testers?

Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.

Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?

Yes, the hardness testers have each been set up for a specific instrument. The heights of the support plate differ. The so-called arbour, on which the cane lies, is available individually, allowing you to convert your machine for other instruments.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured in any case. Also with gouged cane inaccurate measurement results may occur. For this reasons we do not recommend to double the hardness tester as a dial indicator.

What is the difference between the analog and digital hardness tester? Which one is more accurate?

Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analogue hardness tester, the dial has to be turned. The precision of both devices is the same. If required, you can connect the digital hardness tester to your computer to create personal statistics.

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Does the oboe digital hardness test ever need to be recalibrated?

Reed Holder R'S (B-Stock) 17.94 €

Fri, 23 Oct 2026 16:01:21 +0200

Always prepared

Switch reeds with speed and ease.

Whether you like to have a spare reed on hand, have that one reed for the big solo, the special high (or low) note reed, or want a safer place to store your reed during long breaks, the R'S Reed Holder is here for you.

Chrome-coated to match your bassoon, this light-weight yet sturdy reed holder can be attached with the included double-sided tape and will securely hold your reed in place. It can also be removed without leaving any marks, leaving your bassoon unblemished.

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Hygrocase (B-Stock) 139.83 €

Fri, 23 Oct 2026 16:01:14 +0200

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Always ready

Like a humidor, this case maintains stable climate conditions.

The newly designed air vent can be adjusted to allow airflow from the outside or to keep the case hermetically sealed. When the air vent is closed, the rubber seal protects your reeds from changing outside conditions. Using the included sponge you can add water to raise the humidity.

With one glance at the hygrometer, you can make informed decisions about how to care for your reeds and keep the humidity under your control.
The acrylic glass can be cleaned easily with a cloth.

With the air vent closed your reeds are protected against changes in the surrounding environment.

The vent can be easily rotated according to your needs, allowing for more or less airflow as needed.

Opening the vent completely allows the reeds to dry out and acclimate to the surrounding climate.

Case HEXAGON (B-Stock) 39.30 €

Wed, 26 Aug 2026 13:22:18 +0200

Designed with both style and function in mind, the HEXAGON case is the perfect way to store your bassoon reeds securely. The case has been 3D-printed in one piece and the built-in magnets allow it to be effortlessly opened and closed.

With our new color variant Pavonina, you receive a unique reed case with shimmering green, blue, and sand tones. Thanks to the three-colored filament, each case is one of a kind.

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Double Hollow Ground Knife (B-Stock) 38.34 €

Fri, 23 Oct 2026 16:01:20 +0200

Double hollow ground knives with a natural coloured hardwood grip. This German-made knife is an excellent, easy to sharpen knife, delicate enough to use on tips, yet stiff enough not to chatter when used on the back of the reed. With leather sheath.

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Brass Wire (B-Stock) from 8.09 €

Tue, 29 Sep 2026 12:00:36 +0200

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Radius Dial Indicator (B-Stock) 112.53 €

Fri, 23 Oct 2026 16:02:06 +0200

This device allows you to accurately select your tube cane so that it fits exactly in the bed of your gouging machine, giving you more consistent results. If the cane is slightly wider than the bed then the side measurement will be thinner, and if it is narrower the side measurement may be too thick. For cane 16 -37mm diameter.

Display material with small scratches.

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Strope DE LUXE (B-Stock) 63.12 €

Fri, 23 Oct 2026 16:01:15 +0200

Three different grains of leather and one side of sharpening stone, enable you to get an incredible edge. Used by doctors to sharpen scalpels.

The stone isn't damaged, only the case is pushed in at a corner.

B-Stock

B-Stock items have the same guarantee as our other items, but have blemishes from production or minor signs of use from an exhibition.

Reeds 'n Stuff/Bassoon/SALE products

Digital Dial Indicator (B-Stock) 360.69 €

B-Stock

Quality and Control

Curved

Highly Accurate

For Upgrading

Swap It Out

The Tip of Your Choice

FAQ

Synthetic Reed (SALE) 13.99 €

Barrel (B-Stock) from 225.63 €

B-Stock

Your Barrel – Your Choice

Digital Hardness Tester (SALE) 389.94 €

Quality over Quantity

FAQ

Reed Holder R'S (B-Stock) 17.94 €

Always prepared

B-Stock

Hygrocase (B-Stock) 139.83 €

B-Stock

Always ready

Case HEXAGON (B-Stock) 39.30 €

B-Stock

Double Hollow Ground Knife (B-Stock) 38.34 €

B-Stock

Brass Wire (B-Stock) from 8.09 €

B-Stock

Radius Dial Indicator (B-Stock) 112.53 €

B-Stock

Strope DE LUXE (B-Stock) 63.12 €

B-Stock