Reeds 'n Stuff/Oboe/Reed Making Machines products

Profiling Machine arundoMAX 3,499.00 €

Mon, 04 May 2026 12:16:05 +0200

Your Reeds. Your Settings.

Let the machine do the rest.

Scraping by hand demands your full attention, every single time. One inconsistent pass, a moment of distraction, or a long session of repetitive scraping – and the reed you've been carefully building can fall apart at the final stage. There has to be a better way.

The Profiling Machine arundoMAX takes the repetition out of reed-making and puts the precision in your hands. Place your reed on the machine, select one of your saved presets on the touchscreen, close the lid – and watch it work. When the green screen smiles back at you, the profiling is done.

Programmable presets

Dial in your perfect profile once, save it, and reproduce it exactly every time. No re-learning your settings from session to session.

Every Parameter, One Finger

Scrape width, length, and shape – everything that defines how your reed plays is adjustable directly on the touchscreen. Dial in your signature sound and save it as a preset. The next time you sit down to make reeds, it's already waiting for you.

Four speed settings

From quietly profiling reeds during an evening lesson to producing them as fast as possible before a rehearsal. You choose the pace.

Want to scrape just the tip, just the sides, or just the middle? Easy as pushing a button.

Your pace. Your call.

Fine-tune exactly how each program runs – how quickly the blade moves across the reed, how fast the reed rotates between passes, and how many times it goes over. Set it once, save it, and every reed that follows is made on your terms.

Scrape only what you need

Working on just the tip? Refining the sides? Focusing on the middle? Select the zone, adjust the settings, and let the machine do the rest. No guesswork, no over-scraping – just the result you were aiming for.

LED carriage light

See every detail of the scrape clearly, whatever the lighting in the room

No battery, no restrictions

Powered by the included cord, so there are no charging headaches and no airline luggage restrictions to worry about when you travel.

Note: the micro-USB port is for troubleshooting purposes only. Do not attempt to power the machine through this port.

A sharp blade, always.

Dull blades interrupt your flow – and resetting blade height every time you change one is exactly the kind of friction that breaks your concentration. The Blade 360° solves both problems. When the cutting edge dulls, simply rotate to the next sharp section and carry on – at least six times per blade. And because the blade height is set once from the underside and stays locked, changing edges never throws off your setup.

Test a Template

You can also test a template for 60 days.

How does the trial work?

Template Chart

Pregouger 160.65 €

Tue, 12 May 2026 13:32:56 +0200

With this handy pregouger, you'll easily cut cane to the right width. The construction of the bed allows pushing the entire length of the cane under the blade. Thanks to this, the cane is trimmed along its total length, and can be extracted easily. The carbon steel blade assures a long lifespan of the cutting edge. The plastic pushrod protects the blade, while its natural wooden handle lies comfortably in the hand.
Available in all bed sizes.

Gouging Machine from 1,849.26 €

Fri, 08 May 2026 19:55:03 +0200

Ultimate Gouge

The Reeds ‘n Stuff gouging machine is the ultimate machine for gouging your cane. Its cylindrical blade provides the most accurate cuts and a perfectly smooth surface. The design of the machine keeps the blade centered even as you adjust the thickness. Rotating and changing blades is easy to do on your own, as is changing out from one size of cane to another. No need for several machines for all your different instruments.

Variety of bases and blades.

You can choose from a wide variety of bases and blades to gouge to the diameter of your choice, making the one machine for Oboe, Oboe d’amore, English horn and Baroque Oboes. Available in diameters Ø 10 / 10.5 / 11 / EH or Baroque Oboe.

A “change of clothes” for your cane

During the rainy season, reeds often get overly hard and out of control.
And in cold, dry winter air, they can close down excessively.
Changing the thickness of the gouge doesn't help much;
we recommend changing the relationship between the center and the sides.
A small replacement kit for our gouging machines can do just this,
helping you react to changing seasonal and weather conditions.

For the rainy season, we recommend gouging the sides somewhat thinner.
The standard with a REEDS 'N STUFF gouging machine
with a 10.5-mm bed is an 11.41-mm blade unit.
With the small replacement kit, you can exchange it for an 11.6-mm blade unit.

In the winter, we recommend thicker sides relative to the center.
With the small replacement kit, you can switch to an 11.3-mm blade unit
(on a machine with the standard 10.5-mm bed),
effectively converting your gouger to meet seasonal conditions.

You can perform these adjustments yourself in a few easy steps.

Buy

Compare Our Gouging Machines

Passin	Reeds 'n Stuff	American Style	Industry

Cane cutting
With cane guillotine	With cane guillotine	With cane guillotine	–
Exchange beds
No exchangeable bed Available only in diameters 10; 10,5; 11; 12; 12,5 and 15 mm.	Exchange beds in diameters 10; 10,5; 10,7T; 11; 12; 12,5; 13; 14; 15 and 16 mm. Other diameters on request.	No exchangeable bed Available only in 11 mm diameter.	Exchange beds in diameters 10; 10,5; 10,7T; 11; 12; 12,5; 13; 14; 15 and 16 mm. Other diameters on request.
Spare blades

Traditional German Gouging machine blades.	Patented cylindrical blades. 3-ways usable.	An American style elliptical blade.	You can choose from: Traditional German Gouging machine blades; Patented cylindrical blades,3-ways usable; An American style elliptical blade.
Centering the gouge
Centered gouge	Centered gouge is factory-preset. Machine has an adjustment for W-gouge.	Centered gouge is factory-preset. Machine has an adjustment for W-gouge. Built-in precision system for adjusting the center of the gouge plus an attached micrometer.	Centered gouge is factory-preset. Machine has an adjustment for W-gouge.
Cane fixation
Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Vacuum fixation Little teeth in bed ends to prevent cane from moving
Dimension (WxDxH)
21 x 11 x 11 cm	26 x 11,7 x 12 cm	26,5 x 14,5 x 13,5 cm	67 x 35 x 32 cm
Weight
ca. 2,0 kg	ca. 2,5kg	ca. 2,6 kg	ca. 35,5 kg
Voltage
–	–	–	110 or 230 V
Buy	Buy	Buy	Buy

Gouging Machine from 1,785.00 €

Wed, 13 May 2026 16:06:31 +0200

Traditional Gouging Machine

Prof. Günther Passin considered reed-making an integral part of his pedagogical mission.
His demands and our expertise led to the modernization of traditional gougers.
Our machine is manufactured from one solid block of aluminum.
Because of that, all important functional parts are precisely positioned and guarantee accuracy.

The blade can be changed easily, and the modern eccentric positioner
replaces multiple screws for effortless adjustments.
The gouging thickness is adjusted by turning the graduated knob.
The click mechanism with its 5/1000 mm steps allows precise work.
An engraving shows in which direction to turn the knob.

Compare Our Gouging Machines

Passin	Reeds 'n Stuff	American Style	Industry

Cane cutting
With cane guillotine	With cane guillotine	With cane guillotine	–
Exchange beds
No exchangeable bed Available only in diameters 10; 10,5; 11; 12; 12,5 and 15 mm.	Exchange beds in diameters 10; 10,5; 10,7T; 11; 12; 12,5; 13; 14; 15 and 16 mm. Other diameters on request.	No exchangeable bed Available only in 11 mm diameter.	Exchange beds in diameters 10; 10,5; 10,7T; 11; 12; 12,5; 13; 14; 15 and 16 mm. Other diameters on request.
Spare blades

Traditional German Gouging machine blades.	Patented cylindrical blades. 3-ways usable.	An American style elliptical blade.	You can choose from: Traditional German Gouging machine blades; Patented cylindrical blades,3-ways usable; An American style elliptical blade.
Centering the gouge
Centered gouge	Centered gouge is factory-preset. Machine has an adjustment for W-gouge.	Centered gouge is factory-preset. Machine has an adjustment for W-gouge. Built-in precision system for adjusting the center of the gouge plus an attached micrometer.	Centered gouge is factory-preset. Machine has an adjustment for W-gouge.
Cane fixation
Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Vacuum fixation Little teeth in bed ends to prevent cane from moving
Dimension (WxDxH)
21 x 11 x 11 cm	26 x 11,7 x 12 cm	26,5 x 14,5 x 13,5 cm	67 x 35 x 32 cm
Weight
ca. 2,0 kg	ca. 2,5kg	ca. 2,6 kg	ca. 35,5 kg
Voltage
–	–	–	110 or 230 V
Buy	Buy	Buy	Buy

Shaping Machine from 779.57 €

Tue, 12 May 2026 15:21:52 +0200

Functionality and Precision

The Reeds 'n Stuff shaping machine is newly conceived! Linear bearings, a c-clamp for fixing the machine on the table, an improved carriage and high carbon steel blades make this machine the first solution for shaping your cane. This shaping machine fits all brands of shaperforms.

Formenvielfalt

The Price of a machine includes one shaper form of your choice.

More Information

Reed Guillotine 206.17 €

Wed, 13 May 2026 16:08:07 +0200

Cut. Perfect.

The principle of the guillotine guarantees perfect cuts.
With the mm scale you can select the length of the reed between 10 and 80 mm.
Scraped and unscraped reeds can be cut to any length desired.
The adjustable length stop can be preset if you are always using the same lengths.
If ever needed, the hardened steel cutting unit can be resharpened.

- Even hairthin cuts can be done with precision thanks to the windows, which enable you to view the cutting spot from multiple angles.
- The self-arresting reed holder for oboe can also be used for english horn reeds.
  However, for frequent use,
  we recommend the reed holder with mandrel .
- The reed holder can easily be changed. This allows you to use your reed guillotine for all reeds of the oboe family.
  
  The self-arresting reed holder with mandrel is suitable for oboe d'amore, English horn, Viennese oboe as well as for all historical oboes.
- The length of the mandrel can be
  variably adjusted to your staples.
  You can find a tutorial for this here:
- The adjustable length stop can be preset
  if you are always using the same lengths.

Pregouging Machine 832.76 €

Wed, 13 May 2026 15:32:57 +0200

Ready to Roll

This pregouging machine will prolong the life of your gouging machine by reducing wear on your blades.

Rotating the handle pushes the cane through the blades. After pre-gouging, you will only need about five passes on your gouging machine and you are ready to roll!

The patented circular blade gouges the cane to nearly finished thickness and can be rotated several times for years of use.

For comfort and safety, the included C-clamp holds the machine securely to a table edge.

Cane Splitter 196.35 €

Mon, 04 May 2026 15:33:59 +0200

Easily split

The cane splitter is a practical device mounted on a solid base. The crystal clear acrylic housing protects your hands and makes it easy to choose the perfect spot. At the same time, the cylinder catches the split cane pieces.

Position the cane – one strike of the included rubber hammer splits the tube. The durable blades ensure clean and splinter free cuts.

New

The new 2-way splitter allows you to choose one segment to cut out, leaving the rest of the cane intact for you to choose another segment that matches your desires perfectly.

Gouging Machine 2,618.00 €

Wed, 13 May 2026 16:08:01 +0200

For American Style Reeds

The gouger is made for cane up to 11 mm. It has a 11mm bed.
An American style elliptical blade with a quick and fail-safe mechanism
is incorporated to change the blade.
This machine was co-designed by Udo Heng and Prof. Andrea Ridilla.
It is patented under the name of Miami University, and
with Andrea Ridilla and Reeds 'n Stuff as co-authors for 10 more years.

Precise.

Built-in precision system for adjusting the center of the gouge plus an attached mini-micrometer providing absolute accuracy and repeatability.

Compare Our Gouging Machines

Passin	Reeds 'n Stuff	American Style	Industry

Cane cutting
With cane guillotine	With cane guillotine	With cane guillotine	–
Exchange beds
No exchangeable bed Available only in diameters 10; 10,5; 11; 12; 12,5 and 15 mm.	Exchange beds in diameters 10; 10,5; 10,7T; 11; 12; 12,5; 13; 14; 15 and 16 mm. Other diameters on request.	No exchangeable bed Available only in 11 mm diameter.	Exchange beds in diameters 10; 10,5; 10,7T; 11; 12; 12,5; 13; 14; 15 and 16 mm. Other diameters on request.
Spare blades

Traditional German Gouging machine blades.	Patented cylindrical blades. 3-ways usable.	An American style elliptical blade.	You can choose from: Traditional German Gouging machine blades; Patented cylindrical blades,3-ways usable; An American style elliptical blade.
Centering the gouge
Centered gouge	Centered gouge is factory-preset. Machine has an adjustment for W-gouge.	Centered gouge is factory-preset. Machine has an adjustment for W-gouge. Built-in precision system for adjusting the center of the gouge plus an attached micrometer.	Centered gouge is factory-preset. Machine has an adjustment for W-gouge.
Cane fixation
Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Two clamps Spring loaded bed end Little teeth in bed ends to prevent cane from moving	Vacuum fixation Little teeth in bed ends to prevent cane from moving
Dimension (WxDxH)
21 x 11 x 11 cm	26 x 11,7 x 12 cm	26,5 x 14,5 x 13,5 cm	67 x 35 x 32 cm
Weight
ca. 2,0 kg	ca. 2,5kg	ca. 2,6 kg	ca. 35,5 kg
Voltage
–	–	–	110 or 230 V
Buy	Buy	Buy	Buy

Andrea Ridilla holds a Master of Music and a Bachelor of Music degree from The Juilliard School and a Bachelor of Music degree from the Oberlin Conservatory of Music. She is Principal Oboe of the Classical Music Festival in Eisendstadt, Austria and was Principal Oboe of the Festival International Echternach Orchestra in Luxembourg from 1991-2007. She is also Principal Oboe of the Middletown Symphony.

In her CD L’Amore Italiano, released on the Kleos label of Helicon Records, Andrea is featured soloist with the Sofia Philharmonic in Bulgaria under conductor Ricardo Averbach. With Udo Heng of Reeds ‘n Stuff in Annaberg, Germany, she is co-designer of the Ridilla-Heng gouging machine, which is patented in the United States.

What or who were your early passions and influences?

My earliest influence was my family. As the 3rd of 4 children, I grew up listening to music all day in the home, listening to my siblings practice and attending their many concerts.

My primary oboe teacher, with whom I studied for 5 years before college, was Dr. Robert Lloyd, graduate of The Juilliard School in NYC where he studied with Harold Gomberg, Principal Oboe of the NY Philharmonic.

I am a graduate of the Oberlin Conservatory of Music, where I was a student of James Caldwell. I also earned both a Bachelor and Master of Music degree from The Juilliard School where I studied with Robert and Sara Lambert Bloom.

Could you tell us a little bit about your primary instruments?

I play an F. Lorée (Paris) 125 model oboe. I am crazy about this oboe for its myriad color possibilities and its tonal focus. I also own a Lorée English horn and Oboe d'amore. I play piano and frequently accompany my students in lessons.

You co-designed the Ridilla Oboe Gouging Machine with Udo Heng. Any anecdotes you would like to share about the product development process?

It was a distinct privilege to work with Mr. Heng on the Ridilla Gouging Machine. After having received substantial grant assistance from Miami University Faculty Research Funding, I began my research in 1999 at the Instrumentation Lab at Miami University. With Miami scientists, I designed the blade curve that I was seeking.

I approached Mr. Heng with the results of my research in 2002 in Banff, Canada at the International Double Reed Society Conference. He accepted my proposal to create a machine together. I went back and forth to Germany several times until we came to a product that met both of our standards. The best lesson I learned from him, in the middle of frustration, was "Andrea, there is a reason for everything!" — a calming statement!

Mr. Heng often says I approached him when he was a nobody and trusted in him. We all know he was never a "nobody," but he certainly is "somebody" now. Every serious double reed player the world over knows the name, Reeds 'n Stuff and the expertly crafted precision reedmaking tools created by Udo Heng. He has excellent business acumen, creativity, passion and compassion. He has become a trusted friend.

What do you enjoy doing besides playing the oboe?

Of course, I am passionate about reedmaking and could sit for hours on end at the reed table. I view myself as a sculptor trying to bring a piece of grass back to life—a life more beautiful than it ever knew.

I am athletic. I bike and ski and have been on Miami University's Faculty Master's Swim Team. I am proud of my 1st Prize in the Women's 50-meter Breaststroke. I am passionate about culture; I teach a 3-week course in Rome and Florence, Italy each July for Miami University students about the art, civilization and culture of these two fascinating cities. I also am passionate about opera, which inspires me as an oboist. I teach an Honors course each year at Miami University, “Discovering Italian Opera",which includes a trip to see an opera at the MET in NYC. I adore foreign languages, especially French. I take every opportunity to spend time in Europe to improve both my French and Italian.

What would you say are the most important approaches to introducing beginners to learning the oboe?

Begin with an excellent oboe. Look for an oboe that has a reliable mechanism, a true scale and a good tone. You are training the ear first and playing the oboe second. For beginners, locating a used Lorée, perhaps purchased from a college student who is upgrading, is preferable to having the parents purchase a new instrument that is student-oriented. A professional oboe will contribute enormously to the early processes and will retain resale value. Next, use consistent reeds every day; therefore find a good teacher. The "teach yourself" method of oboe playing is a recipe for bad habits. Practice, scales, études and sight-reading every day. If you are a teacher, from the very beginning add the assignment to play familiar melodies from the classical repertoire, even if you have to notate them in a simpler meter for youngsters to be able to read. As the great Bobby McFerrin advises, always have the student play a melody of choice each week "by ear," eliminating the barrier of notation that, sadly, often lasts a lifetime. (Notated music famously does not look at all like it sounds.) Primarily, strive to be a musician and not a technician.

Unlike the academic calendar, music is a 12 month proposition. I recommend that students attend summer music festivals all summer long from as early as age 12 onwards. The secret: the more you play, the better you play!

Anything else you would like to add?

I encourage students to listen; all oboe playing begins with a sound concept that speaks to us through the ear. And oboe playing is a living, breathing art form evolving every day. I am inspired by the excitement that Liang Wang, Chinese-American Principal Oboe of the New York Philharmonic has brought to the world of American oboe playing through his total mastery of the oboe and his profound insights into reedmaking. His talent for making music on the oboe is at a level seen rarely --occurring perhaps at most once-in-a-generation. I recently spent an afternoon with him in his studio in NYC. He humbly acknowledges the world-class education he received in the US expressing his gratitude for the opportunities that he earned in America from a very early age. Liang and I share the same lineage of teaching, having both studied with Sara Lambert Bloom and so, we communicate on the same wavelength. Liang is truly on the cutting edge of oboe playing. His tone is unique—warm, velvety and expressive. And he is kind and generous, witty and warm, respectful and trustworthy—a "mensch" as some would say.

I am proud to know him and especially, to gain his insights into his world of oboe playing. In addition to his passion to teach and to mentor the next generation, Liang is a world ambassador for wind music and for cross-cultural connections.

In April 2012, Andrea was guest artist at the Moscow Conservatory of Music and the St. Petersburg Conservatory of Music performing, giving oboe masterclasses, and reedmaking masterclasses. In March 2012, she was the guest oboe professor at the 3rd Encuentro of the Asociación de Doble Caña of Seville, Spain. In 2010, she appeared as soloist at the Musica no Museu Festival in Rio de Janeiro, Brazil as well as concerto soloist with the Quito Orquesta da Camera in Ecuador. She has also been concerto soloist with the Guayaquil Symphony Orchestra in Ecuador, the Festival Echternach in Luxembourg, the Moselle Music Festival in Germany, the Classical Music Festival Orchestra in Austria, the Westmoreland Symphony, and the Ashland Symphony. She has been a guest performer in several concerts with Camerata Pacifica in Santa Barbara, California. She has performed solo recitals throughout Italy: in Rome, Florence, Turin, and Pisa. She won the top prize for winds at the Munich Preliminaries of the Torneo Internazionale di Musica Competition, and was one of six international soloists invited to Rome in May 1998.

She was awarded fellowships to Tanglewood, Yale at Norfolk, and the Music Academy of the West. Prior to her appointment at Miami University, she served as principal oboe with the Las Vegas Symphony, Rhode Island Philharmonic, and the National Orchestra of New York. She has been on the faculties of the University of Nevada, Las Vegas, and the New York State Summer School for the Arts at Saratoga. Her oboe teachers have included Robert and Sara Lambert Bloom, Louis Rosenblatt, Allan Vogel and James Caldwell. She studied reedmaking and gouging with Joseph Robinson, and took perfection classes with Hansjörg Schellenberger, and Maurice Bourgue.

Source: forkedf.com, May 13th 2016

Cane Cutter 345.10 €

Tue, 28 Apr 2026 13:25:28 +0200

High Class.

The cane cutter can be adapted for all members of the oboe family.

The adjustable length stop allows for any needed length of cane. The two high grade carbon steel blades guarantee clean cuts. The uniquely shaped upper blade ensures fiber-free cuts every time. And the matching lower blade provides the necessary support for the chosen cane diameter, eliminating micro-cracks.

You can select from the following diameters: 10; 10.5; 11; 12 and 12.5 mm, as well as for baroque oboe.

Reed Guillotine 206.17 €

Wed, 13 May 2026 16:08:07 +0200

Cut. Perfect.

- Even hairthin cuts can be done with precision thanks to the windows, which enable you to view the cutting spot from multiple angles.
- The self-arresting reed holder for oboe can also be used for english horn reeds.
  However, for frequent use,
  we recommend the reed holder with mandrel .
- The reed holder can easily be changed. This allows you to use your reed guillotine for all reeds of the oboe family.
  
  The self-arresting reed holder with mandrel is suitable for oboe d'amore, English horn, Viennese oboe as well as for all historical oboes.
- The length of the mandrel can be
  variably adjusted to your staples.
  You can find a tutorial for this here:
- The adjustable length stop can be preset
  if you are always using the same lengths.

Profiling Machine 1,999.20 €

Mon, 11 May 2026 17:43:42 +0200

Three things lead to incomparable sound and resonance: our vast assortment of templates, the length of scrape adjustments, and tongues. They allow flexibility; and more than that, perfect reeds.

A sharp blade, always.

Accuracy and Adjustment

Our extra hardened blade is formed into a rounded shape with a diamond grinding stone. This allows for the reproduction of even the most detailed reed profiles. When exchanging the blade, the blade adjustment dial indicator makes it incredibly easy to set up the perfect blade position.

Buy

Transport Bag Included

The Reeds 'n Stuff transport case features
a simple design that's easy to use.
The foam interior allows a safe transport
and provides a snug fit.
The tools to use the machine can be stored
in the zipper closed compartment on top of the case.
The handle gives Portability wherever you need it.

Test a Template

You can also test a template for 60 days.

How does the trial work?

Template Chart

Choice of Tongue

It depends on the preferred width, radius and tip of the reed. Buy

Length of Scrape Limiter

The length of scrape adjustment defines the shape of the beginning of the scrape. Buy

Reeds 'n Stuff/Oboe/Reed Making Machines products

Profiling Machine arundoMAX 3,499.00 €

Your Reeds. Your Settings.

Programmable presets

Every Parameter, One Finger

Four speed settings

Your pace. Your call.

Scrape only what you need

LED carriage light

No battery, no restrictions

A sharp blade, always.

Test a Template

Pregouger 160.65 €

Gouging Machine from 1,849.26 €

Ultimate Gouge

Variety of bases and blades.

A “change of clothes” for your cane

Compare Our Gouging Machines

FAQ

Gouging Machine from 1,785.00 €

Traditional Gouging Machine

Compare Our Gouging Machines

FAQ

Shaping Machine from 779.57 €

Functionality and Precision

Formenvielfalt

Reed Guillotine 206.17 €

Cut. Perfect.

FAQ

Pregouging Machine 832.76 €

Ready to Roll

Cane Splitter 196.35 €

Easily split

Gouging Machine 2,618.00 €

For American Style Reeds

Precise.

Compare Our Gouging Machines

Andrea Ridilla

Cane Cutter 345.10 €

High Class.

Reed Guillotine 206.17 €

Cut. Perfect.

FAQ

Profiling Machine 1,999.20 €

A sharp blade, always.

Accuracy and Adjustment

Transport Bag Included

Test a Template

Choice of Tongue

Length of Scrape Limiter