Reeds 'n Stuff/Oboe/Reed Making Machines/Accessories and Blades/Profiling Machine products

Blade Adjustment Indicator 215.08 €

Fri, 09 Oct 2026 15:52:21 +0200

Dial it in

Simply adjust the blade of your Profiling Machine with our new Blade Adjustment Indicator.

52 Clock Face

54 Srew

57 Measuring Pin

24 Blade Set Screw

25 Blade Adjustment Srew

Before you begin, remove both the wooden handle and the blade. Then fit the dial indicator over the carriage as pictured.

Tighten the large screw on the dial indicator to secure it.

Rotate the clock face as needed to set the dial indicator to zero.

Place the blade on the carriage as pictured. As you slide the blade into place, the slot the side should fit with the corresponding ledge on Screw #25. At this point it is important to confirm that the blade does not protrude beyond the black depth stop.

Tighten Screw #24 all the way, so that the blade is held completely in place. Then gently loosen it by less than a quarter of a turn, until the blade is held securely but can be moved by turning Screw #25.

Turn Screw #25 until the dial indicator reads precisely 2.5 to 3 hundredths of a mm (=0.025-0.03 mm) . At this point, the blade depth will be set appropriately.

Tighten screw #24 all the way. The machine is now ready to use. Before you start using the machine make sure the blade does not touch the tongue. See instructions in chapter: thickness adjustment.

As you remove the dial indicator from the carriage, be sure to pull on the axle of the dial indicator as shown to avoid any damaging contact with the blade.

Pen-Oiler 7.19 €

Fri, 09 Oct 2026 15:51:06 +0200

Versatile and reliable

Versatile in use as it neither becomes resinous nor ages. A reliable companion in machinery and tool manufacture, for corrosion protection, and as a cleaner, contact spray, lubricant and rust remover. Well suited for the maintenance and servicing of machine parts, as well the food industry (non-volatile ingredients are approved as additives according to the German Food and Consumer Goods Act).

Advantages

Prevents fine mechanical wear and prolongs the lifespan of chains, moving parts, and bearings
Cleans all machine parts right into the last gap
Lubricates all moving machine parts
Prevents current leakage on electrical components
Loosens rusted and jammed connections
Removes tar marks and protects against fingerprints
Neutralises leaked battery acid or hand perspiration
Cleans resin from planing machines, among other things
Rub it into your hands before starting work and you can easily remove oil and dirt

Environmental Compatibility

Biodegradable. Harmless for humans and nature. Plant friendly. Free from animal products.

Machine Oil 6.13 €

Fri, 09 Oct 2026 15:52:33 +0200

Squeaky clean

The classic multifunctional oil. Dissolves and protects against renewed corrosion.

Eliminates squeaking and creaking noises.

Cleans, preserves and lubricates permanently.

Suitable as a contact spray and displaces moisture.

Precision instrument oil, free of resin and acids.

With hanging tag.

Sealed with a leak proof sealing cap.

Provides precise dosage.

Swab from 7.00 €

Fri, 09 Oct 2026 13:20:51 +0200

This highend cleaning fibre is particular carefully, fluffy free and offers highest absorption. It is ideal for cleaning precision mechanics and flaps.

Service Set 12.11 €

Fri, 09 Oct 2026 15:50:53 +0200

A set of spare parts for the Blade 360° complete with:

1x screw driver tx6
1x screw M2.5

Transport Bag 91.25 €

Fri, 09 Oct 2026 15:52:19 +0200

Profiling Machine To Go

Transport Bag Included

The Reeds 'n Stuff transport case features
a simple design that's easy to use.
The foam interior allows a safe transport
and provides a snug fit.
The tools to use the machine can be stored
in the zipper closed compartment on top of the case.
The handle gives Portability wherever you need it.

Length of Scrape Limiter 69.67 €

Fri, 09 Oct 2026 13:20:35 +0200

Shape your Scrape

The length of scrape limiter determines the shape of the beginning of the scrape.

- EU-Standard for Oboe
  
  This is our standard scrape limiter for all non-US oboe templates.
- U5
  
  For those who like a smaller U-form, leaving a little more cane on the sides than the standard U-shape.
  Reeds will have a slightly larger opening, especially when used with larger diameter cane.
- U8
  
  Leaves some cane on the sides,
  almost like rails.
- EU-Standard for English Horn and Baroque Oboe
  
  Suitable for all english horn templates.
  This is our standard scrape limiter for non-US English Horn templates.
  This is our standard scrape limiter for baroque oboe.
- US-Standard
  
  US long scrape limiter for oboe or english horn reeds.
- W2
  
  Designed for the French-style W-shaped scrape.
- Viennese Oboe
  
  This scrape limiter is designed for Viennese oboe.

Tongue 148.91 €

Sat, 10 Oct 2026 19:34:12 +0200

The choice of tongue depends on
the preferred width, radius and tip of the reed.

To convert your profiling machine from one instrument to another, you'll need a tongue, a corresponding length of scrape limiter, a suitable mandrel and a template.

Mandrel 52.39 €

Fri, 09 Oct 2026 13:20:34 +0200

For making Englishhorn or Baroque Oboe reeds with the profiling machine.

You will also need an appropriate tongue.

Blade 360° 183.30 €

Fri, 09 Oct 2026 15:50:43 +0200

A Revolution into the Future

After years of development, Reeds 'n Stuff is proud to offer the Blade 360°. When the blade becomes dull simply rotate to the next sharp section and continue profiling. This can be done at least 6 times, providing reeds and reeds of profiling before a replacement blade is needed.

The screw holding the blade is easily accessed from the underside, meaning once the height of the blade holder is set, you can set it and forget it. Simply loosen the screw, rotate the blade, and re-tighten the screw. Within seconds you can continue profiling reeds, rather than having to replace the entire blade.

To rotate the blade, first loosen the screw on the underside of the blade holder with the attached screwdriver.

Carefully rotate the blade to the next desired position.

Hold the blade in place while tightening the screw with the provided screwdriver and you are ready to profile.

Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.

FAQ 360° Blade

Spare Blade 100.25 €

Fri, 09 Oct 2026 15:50:43 +0200

A Revolution into the Future

To rotate the blade, first loosen the screw on the underside of the blade holder with the attached screwdriver.

Carefully rotate the blade to the next desired position.

Hold the blade in place while tightening the screw with the provided screwdriver and you are ready to profile.

Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.

FAQ 360° Blade

Handle 15.43 €

Fri, 09 Oct 2026 15:53:18 +0200

Screw Set 16.76 €

Fri, 09 Oct 2026 15:53:17 +0200

Spare Parts Storage

We prepared a set of spare parts for your Profiling Machine.

2x Rubber bumper for carriage movement limiter (12a/13a)

1x screws for template (15)

1x screw for length of scrape limiter (16)

1x screws for plaque (17)

2x screws for clamp positioning rings (18/28)

3x screws for carriage movement limiters and for thickness adjustment (19/21)

1x blade screw with washer (24/24a)

1x Transport lock screw (29)

1x screw for blade 360°

1x T10 Screw Driver

1x T6 Screw Driver

Screw Set 3.44 €

Fri, 09 Oct 2026 15:50:43 +0200

Spare Parts Storage.

We prepared a set of spare parts for your Profiling Machine.

16 2 length of scrape limiter screws

15 2 template screws

screw driver

Handle 26.12 €

Thu, 25 Jul 2024 20:50:12 +0200

FAQ

Does my older profiling machine fit in the transport bag?

We updated the handle of our latest profiling machine. The new vertical handle fits perfectly in our transport bag. If your machine has an older handle, you can simply exchange it.

- Older modell.
  
  Please exchange the handle.
  Buy the Handle
- Latest Modell.
  
  This handle fits perfectly
  
  in our transport bag.

Reeds 'n Stuff/Oboe/Reed Making Machines/Accessories and Blades/Profiling Machine products

Blade Adjustment Indicator 215.08 €

Dial it in

Pen-Oiler 7.19 €

Versatile and reliable

Advantages

Environmental Compatibility

Machine Oil 6.13 €

Squeaky clean

Swab from 7.00 €

Service Set 12.11 €

Transport Bag 91.25 €

Profiling Machine To Go

Transport Bag Included

FAQ

Length of Scrape Limiter 69.67 €

Shape your Scrape

EU-Standard for Oboe

U5

U8

EU-Standard for English Horn and Baroque Oboe

US-Standard

W2

Viennese Oboe

FAQ

Tongue 148.91 €

Mandrel 52.39 €

Blade 360° 183.30 €

A Revolution into the Future

FAQ 360° Blade

Spare Blade 100.25 €

A Revolution into the Future

FAQ 360° Blade

Handle 15.43 €

Screw Set 16.76 €

Spare Parts Storage

Screw Set 3.44 €

Spare Parts Storage.

Handle 26.12 €

FAQ